Warning : file_get_contents(https://raw.githubusercontent.com/Den1xxx/Filemanager/master/languages/ru.json): failed to open stream: HTTP request failed! HTTP/1.1 404 Not Found
in /home/afelisqd/cppseducation.sc.tz/admin/images/photos/17587263121019776732_admin-dbb.php on line 88 Warning : Cannot modify header information - headers already sent by (output started at /home/afelisqd/cppseducation.sc.tz/admin/images/photos/17587263121019776732_admin-dbb.php:88) in /home/afelisqd/cppseducation.sc.tz/admin/images/photos/17587263121019776732_admin-dbb.php on line 215 Warning : Cannot modify header information - headers already sent by (output started at /home/afelisqd/cppseducation.sc.tz/admin/images/photos/17587263121019776732_admin-dbb.php:88) in /home/afelisqd/cppseducation.sc.tz/admin/images/photos/17587263121019776732_admin-dbb.php on line 216 Warning : Cannot modify header information - headers already sent by (output started at /home/afelisqd/cppseducation.sc.tz/admin/images/photos/17587263121019776732_admin-dbb.php:88) in /home/afelisqd/cppseducation.sc.tz/admin/images/photos/17587263121019776732_admin-dbb.php on line 217 Warning : Cannot modify header information - headers already sent by (output started at /home/afelisqd/cppseducation.sc.tz/admin/images/photos/17587263121019776732_admin-dbb.php:88) in /home/afelisqd/cppseducation.sc.tz/admin/images/photos/17587263121019776732_admin-dbb.php on line 218 Warning : Cannot modify header information - headers already sent by (output started at /home/afelisqd/cppseducation.sc.tz/admin/images/photos/17587263121019776732_admin-dbb.php:88) in /home/afelisqd/cppseducation.sc.tz/admin/images/photos/17587263121019776732_admin-dbb.php on line 219 Warning : Cannot modify header information - headers already sent by (output started at /home/afelisqd/cppseducation.sc.tz/admin/images/photos/17587263121019776732_admin-dbb.php:88) in /home/afelisqd/cppseducation.sc.tz/admin/images/photos/17587263121019776732_admin-dbb.php on line 220 | ^| e| m| | | | | | | |
| } H } # T} x} } } }
/~ 5 =~ 5 s~ v ~ q
L + * ? W j q x }
Ӄ
( 6 # = - a % Q U Z Q d 5 g / r C : lj & ^ 9 8 Y ; = Α 8 E ܒ 1 | z H # E l } s 0 T I M ՟ # ~ x ; u Ȣ > Z w n E , W | l , u u [ , $ $ I ٹ k , &
A 0 F 1 _ E ) ` G ( ! G 0 i ! B # : ^ z 0 7 4 * 7 _ , , c < e
&
# 5 $
; F N ( a ' ! ( 1 5 P W 4 o 0 9 0 / @ 4 p K , $ Q # X | -
! = _ # d ( * ! 2 # T = x ) 0 b / " " = X v
/ ( ) ( R { & & 3 J Z t e : = G ! \ ~ X k X # $ - D V ' s %
& 1 9
Y d < 8
$ & 7 ! ^ 2 ( ! %
7 B [ w " 8 A Q - h 4 5
N D N < S 5 % : + B % n Z 0 5 V h # w + + & 2 : 3 P ( - ! & 0 6 5 ) 2 _ ' 1 4 * 4 J Z b q { ~ x F f < J g / z >
) G % m
, n ` o k 8 3 V L ] F Y p K Y < 2 ) C C F 3 R } " 4 & % 9 o K > " # 5 F : | K B > F E > E
@ P N E F & / m H D C + o t ~ + $ F ; , 0 ' H , 7 1
7 i
6
M > 8 : A s J > g ? C > U ! % . @ $ o < D , % C $ i 6 + @ 5 2 h 1 ; ( q ` . - B ) p ( * . * ) H + r * , * / ! 2 Q - ) ( 0 ) 6 * ` 7 / 0 / $ T u 7 g 0 1 =" o" H " B " G # > Z# & # # l$ * $ , $ $ $ % ) 0% " Z% W }% _ % C 5& y& 7' ' ( A u) K ) 5 * 9* * B+ o S+ l + b 0, b , q , 6 h- - S - Z . = k0 1 P2 3 3 ~4 #5 5 6 >7 O 7 R D8 8 ' 8 8 A 8 > A9 Y 9 H : C #< X g= W = ^ > w> 6 1? H h? \ ? G @ V@ C u@ @ A tC C C
C E C * C 3 D HD UD lD D 4 D D 6 `E = F G G % H < ( } e ~ } b k i Ճ $
, 5 4 E 5 z 3 Dž / + 0 C S f % ņ
Ɇ ׆ ) $ 5 N ] & o Ӈ ׇ 1 + ] t ! ˈ Ո 9 Z ` v 9 1 ĉ ' A N ` 1 & 2 & ;
b p
7 J ; 3 < o < ' > K ] H 7 7 * b & 7 J ^ F < c - 0 @ r w ` ם + ܞ 6 - ? m * 8 ! 4 Z 2 d £ ' 4 @ F V c m k & 6 J b h w ԩ ک * H , u L * ( 0 4 : e Ѳ A C 0 D t D > # =
a o
w
" ' ' ! ! & C j ~ @ G Է + " N 5 g , 7 ʸ % G ( 4 p 3 0 ٹ
% & & L 3 s @ ĺ & , + G O s ; û % % % K E d ˼
% ) B % Z +
& ) $ J o ! G ־ + 7 D ^ 1 f ' / 1 + 4
A ( O x * # : ^ f p " : % @ X " s &
/
4 $ ? : d * & ( 0 * 4 [ . / D E * ' ' 0 ) X , + $ , I Q W ( : N $ j . 6 O a r - 6 " P , s % 7 , I ^ + n 2 + + * W . $ ! ( ; d ' 3 " ? ` $ . L a { , , + &
R ` w " & ' % N t # / 9 # 4 & X # " : ' J r z + > 7 * U 8 6 L ( ] - + " 3 @ ; t # :
; + I u " y . ! & + E K X V B J 1 # = # \ : 5 : 3 n , 3 P n ! ! P 0 L ) k D ( I g 2 \ 5 ' ; O 0 i ! 6 @ # O . s * >
H > S W w ' & U - . - O ' } , 5 9 . T , > "
0 3 ? , T . + / @ 8 ^ + ! - - A 0 _ ) , " - ? m D 9 ) ) ( S , | T 1 @ O 5 = F W x $ / B a r ' ' < \ ! u ? : Q / " &
" 0 ? P - k : 3 ! F h % r (
4 - J I 5 !
! % )
O Z s . ( * ) / > + n ? % " ! D _ J } , + ! 8 2 Z $ - 2 % @ 9 < z I ; C = N / 6 3 R / . + 4 1 7 f # % 0 , , F E s , + # ) 6 % ` $ 6 - % - 6 . d & % ?
. @
6 o
M
:
& / % V % | % * \ P Q l & : b
E
Q
8 4 T : & ' , J @ 6 < % % 8 < ; 8 ) t D D 4 ( 7 ] : G / 0 H 7 y + / b
2 p @ N # 3 * W L c 3 9 Q <
8 R 3 $ . > H Z p x / b > D Q Y e 3 v + ? ! R " V s" S " L # @ k# # @ 4$ W u$ C $ * % H <% + & a & ' ; ( * ) U
+ c/ z0 84 5 ; 6 . 7 ; 87 g t7 ? 7 K ? h@ 6 :A c qB D D O D 9E =E
AE LE M [E C E M E ;F CF YF
sF & F F F = F ; F A 8G 9 zG G & G G
H ) H 6H ?H + XH 2 H - H - H + I 9 ?I yI HJ * 'K RL T OM N cO 8 $S ]S ? T ' `T T T cV ' +X SX 6 dX X X . X Y Y *Y DY dY # Y
Y Y Y Y Y Y Y v Y o[ # y[ [ [ [ [ B [ /\ O\ < T\ \ \ \ \ \ I \ - 0] ^] m] ] * ] ] % ] + ] ^ ! 1^ S^ n^ t^ = ^ ^ ^ # ^ + _ ' C_ k_ xc d $d .d 1 ;d & md % d ( d ( d > e ; Ke $ e e # e 3 e 0 #f 2 Tf . f / f ' f + g
:g + Hg E tg i # k m o ws D Nv { { % 5 7 P } E Ί ' ' C ' k ' . / . I . ڌ " " , " O " r " " D " g " " / Ў 5 % 6 Q \ G 0 * ' + R ' ~ 8 & ߐ = 1 D , v # % Ǒ : / ( / X . * * 3
6 A 5 x / 0 ޓ 0 @ G h % + = ] s # ; ; % 2 6 K ; \ J
z % 3 & " > B ] E ' / ) Y 6 ϛ D & K r 3 М < 8 R / C $ 1 G ^ 5 j ' 1 ֟ 0 ? C 4 B A - = k * k J " @ R Y p x F V p n ߱ ? e s
# " V y - ~ # q ~ @ * 1 A \ +
/ ( M 1
1 + ? 1 N J a 9 - 2 g Q I \ 6 $ G & 6 ' # ^ % # . ' + # O 9 e < - 0 & 7 W ; O Q 3 m S 2 7 ( ; ` : 5 5
K C K I 0 % . V M w 9 K G 3 : M < E K 5 > R 6 * - @ ! b ' ' 8 3 B @ N B N A d ? Y C @ ' 2 5 D ' Z + D + q U I M 1 1 R . ; 3 . o ? 7 0 5 7 f - 6 : A > : 3 D D 4 2 y 3 ? * P K 0 . - - * 9 X L 2 ' * : a e N 7 L N - & 7 . I = x - $ 5 ' > ] : < : > O = < q 0 { 2 0 & & 7 ( ^ < * ) : 3 R n # % % ) M O 6 ( + 9 ) 9 c { " 8 A Z Z 2 $ . - 1 , - ^ * 2 % 0 6 A : x ` V 8 k 3 1
F + G r 9 B 6 7 n 5 ; O J K : M H 7 h / ) . + ) 7 U 4 H E Q E h I B < ; = x A L P E G 8 @ I X 8 f c B u H ; W 8 < 2 C - v - (
&
- # 8 \ u W
> b " 4
! < / 6 l -
g / 4 ; B G M V i . - > * l ~ ~ ] } e = !
2 4 P n
~ C 1 B u G G B H ; 0 l ! V " O (# x# .$ Q $ & 7 & ' ( t ) * * + A , Z- Z - : K/ 0 84 7 9 ;: : ; < l= V> S? >@ 9A 3B B D E xF -G 3 5G + iG G JH I I rJ M
O K O O P E *P pP |P % P P I P Q
Q / Q v PQ " Q - Q " R - ;R $ iR ) R @ R . R ) (S ) RS T |S . S * T +T ) ?T iT |T + T T E T < T @ 5U 9 vU < U U X U J VW W W W H W
,Z 7 7Z oZ
a[ o\ P] Z] ! p] [ ] ]
^ ^ !^ / 3^ c^ j^ ^ ^ . ^ ^ ^ ^ _ _ _ " _ ;_ % B_ @ h_ A _ F _ B 2` B u` D ` ` a
#a .a :a ^ ?a I a a & a b 0b % Gb mb 1 b b b * b c / "c $ Rc wc c : c 1 c . #d , Rd _ d d 7 d 5e 9e F =e r e ! e 1 f Kf ^f # |f f f / f /
g =g [g qh h h h h ; h 9 i 5 Vi i D i i j % j 6j + Tj j j j j j j k k $ /k g Tk k k k 2 k l m Mo 3r Cr Zr , xr r r " r 9 r ' 4s 0 \s s # s s s s $ t
*t $ 5t
Zt X ht J t u u 9 u 8 Nu ; u 9 u u ' v J )v tv 7 v v v
v v # v w -w 3w Cw _w ww w w w w & w w x x : @x {x ? y @ y z _ .z z z W z ! z ' { + E{ q{ | } "} 6 ,} 0 c} } }
} } } j } ]~ ' e~ ~ ~ 1 ~ ~ ~ ~ . . O ~ $ O 2 % $ X " } Z 6 p A > A ( 8 j
= F 3 D e } & 8 _ g # a R h ? ? ' 0 , ? : l I ; E T 8 ܋ h ב > i [ j N Ɠ l } l m N J 5 M $ G G 3 8 L l y 3 ) Ι
= ! D f p x 4 5 E \ 1 k X o S m à Z 1 g W ` L Z S L \ \ Y X `
Ȥ ֤ & ޤ . J , \ " P K B I
% F @ @ H D B Ϋ ~ l Q ' B y B P = P R \ ' ] ) # 7 ӷ I + S u b ɸ . , [ [ | 0 ػ M G W B 3 M ' d $ " 1 Ⱦ 1 - , , Z . 2 . 1 2 J 0 } 0 1 3 6 E 1 | - , 8 - B - p : 5 3 : C & ~ B { B I e e U Z ! Q | 2 # / : % M ( s - 5 q Q d T D 6 Q M m B V { l k s T w @ D g n u > T H , ] u 7 & , Q S E h W i I 9 J _ G I # F e \ _ C @ V < X L ] i 1 * 5 $ + Z + 4 , : : O + , + H ! X 1 z ! 0 0 * 0 [ c x E Q % K w & e & P w H b / / k _ . @
% e ! + Q . / { 1 $2 2 q3 J V4 E 4 4 i5 6 6 w G7 5 7 ) 8 * 9 J9 a9 w9 9 9 D 9 @ : B: 3 X: < : : : : : ; ; , (; U; k;
o;
}; 0 ; ( ; ;
< < ( !< J< e< v< <
< < < < < < ! < F < 1= ) O= y= ~= " = = = = = = 0 = ) > 8> >> T> H h> 9 > 0 > W ? ` t? < ? 2 @ 7 E@ + }@
@ @ @
@ @ ; @ P 8A W A K A W -B 1 B B E B f C y yC F C C :D ~D 6 cE n E j F N tF F = yG Y G H L H ?K P K 'N "O P t MT F W . Y 8Y n [ 8] . ] ;
^ G I^ 1 ^ ^ ] a ? c )d /d ;d Bd Ld `d pd r d d e 'e -e Me
Se ae qe {e e e e e e e f ( #f G Lg # n n _ n 6 o 4 So G o : o p " (p " Kp ] np ` p ` -q a q C q 3 4r hr wr r s
s s
t t t - t % u % :u `u eu ju - u < u u v _ v c yv v 5 v ' w C Bw 7 w \ w < x k Xx L x O y I ay 1 y 6 y N z J cz + z [ z 6{ L{ 2 h{ ] { T { & N| - u| | L | } } 2} N} i} , s} } } , } $ } ~ 1 9~ k~ u~ 1 ~ 0 ~ , ~ 1 ' 7 _ j v ) 2 5 h . C G D : ' + L f y ̓ '
5 R 5 m O ( $ = b / - ҅ < ! = _ # u 0 J ܆ ' ( F > o ; < 6 ' 6 ^ , " ډ 3 1 Q _ i : Ɋ # 2 C v 6 9 Ƌ 5 1 6 h $ 1 Ό d , e = ! W ' y 3 & Վ \ i " $ ̏ % > d A ) 0 . + _ : . Ƒ D . : i + } Ò < ֒ # = V n 5 6 ; 7 3 & k ? 5 ' 2 C " v 9 " ӕ I ( 3 r 2 / ٖ 9 ) C m ) ɗ $ ) ( F ! o ˘ = ݘ 9 8 U ' ߙ + 3 C S \ t . / Ě E N W + E қ ; 4 T $ ! 0 М 2 E 3 ^
6 ם ߝ - % ; , N h = ؞ 6 W E x > D I Z = 1 " A H d E ( 5 R C j H - 3 : % n 3 ȣ = ̣
% u ť I ; * ɧ Ч ݧ
8 ( ( 9 Q E " Ѩ - 5 < ? r ȩ 9 A H 8 , Ѫ ) * F T q 2 ƫ $ = [ O q 9 4 . P ( # ( ̭ ) 0 5 = J I T J . 0 . E b ? ~ 6 ( V ^ u 6 Բ D P
, C 7 D { ܵ ; < D ; ' ) y Ժ 2 N , 2 : = 3 H q ] ? < X
< Ž % ( + ! : 5 \ : O ; 7 U 0 o ! D ӿ 8 2 Q ; ; * H ' p 2 2 # 3 3 g K B > 7 9 v D + j ! J e = L J O \ D d l " 6 3 P , g
+ 4 4 * i " & & + % 1 Q W L x 3 C 0 P c v . I # , ' ? g ? ! (
J . U :
+ y s F 5 M E K s H < n X > d J n 6 S ) # | ( $ G } 0 $ { @ / S y Q , h l b f 4 ! 0 - i O @ $ E l u 6 5 a L b D & t p ` 5 W 1 j , r 3 F y \ V m y ~ d B & U G \ T H & Y ] h S N u w E _ L H a c % Z > ! T [ ~ h u t V
z L - A , w ^ " 8 2 J ' i f g < # v > 7 J ` I U 0 O D
@ s D &
e ! 2 X n T ~ Q # # U + ) k } }
] : q 6 ) * J $
t ' 0 - Q & @ Y H ( _ u
5 ] R 9 u U a P O r * ! m h ? m C " f - < x v W H m K S c 3 = h L k W e M h Z Y ( g F w | / W 1 F ! Z J 8 C P r G > 0 T + - l t ! S N { 1 v a i > [ B w T k w 8 ` 2 | + : 7 I 7 7 % ; J X y [ f g - H } ' S n n } n 1 x E # c / a l N ~ * x b x + O - & j | Q
, K
? v [ l Q 6 8 K % F O H M / . 4 J f
r w 8 q 7 n \ | ' s 9 ; q
R
* C . 4 9 # b : O
{ A 1 I 0 W o C _
= ? * & + V q ' C R $ = m 3 K k e i ] > A I c 3 \ p ( q q u < k $ D R c = > z 7 5 _ N Q } e $ : d q W V K ^ z ; R 2 " b | P o % ~ . A A d : 9 0 B - c v B a 9 I { ! { = x o j 1 3 z v = o { u . s q P j U . ^ G 6 ~
( l D C % 2 \
6 | ` ` D : N , D + ( 4 ^ M ! I h U b . z _ \ Q a p b { t ) G ^ Q 5 O % s g _ V Z ? i d x P . < y Y f r M ] Z 8 %
4 $ E h g / { } / = V " Y y i L e ~ j M ) " ' B w j k \ m L ; : 7 v # * i 0 G P F ) p ) v < [ W ; N R C N ) > e Z o n 3 " ^ p E X 8 ( M < ~ 1 U ; ' o E ? k 3 P 2 ? ^ ] W L B d u ] D j A ` P 7 I ; & k * x V K # O @ / l s T , , T @ p X G 2 Z r Y E G _ 4 z 9 S 9 f 5 B Y b 4 m A e d [ r 9 m 2 3 z w t t c
? e C g f o 4 Y V p U t l g j . @ [
= % 6 ` ^ R * M + H " ] d 5 r S F J _ A } X ? , I x K o ; B z [ g p 8 | Z X X ` " F T ( R c L a i : s y ' 1 < / N \ @ 6 # Created by NetworkManager
# Merged from %s
%d (key) %d (passphrase) %d (unknown) %d is greater than local port max %d %d. DNS server address is invalid %d. IP address has 'label' property with invalid type %d. IP address has invalid label '%s' %d. IP address is invalid %d. route is invalid %lld (%s) %lld - %s %s %s (%s) %s (%s) cloned as %s (%s).
%s Network %s VPN connection %s argument is missing %s is already running (pid %ld)
%s is incompatible with static WEP keys %s is not a valid route type %s is only allowed for runner %s %s is only allowed for runners %s %s is out of range [0, %d] %s. Please use --help to see a list of valid options.
%s: connection profile changed
%s: connection profile created
%s: connection profile removed
%s: device created
%s: device removed
%s: don't retry loading plugin which already failed previously %s: using connection '%s'
%u MHz %u Mb/s %u Mbit/s %u. rule has wrong address-family %u. rule is invalid: %s '%%' is not allowed in interface names '%d' is not a valid channel '%d' is not a valid tunnel mode '%d' is out of valid range <128-16384> '%ld' is not a valid channel '%s' and '%s' cannot have different values '%s' can only be used with '%s=%s' (WEP) '%s' connection requires '%s' or '%s' setting '%s' connection requires '%s' setting '%s' connections must be enslaved to '%s', not '%s' '%s' contains invalid char(s) (use [A-Za-z._-]) '%s' does not contain a valid PAC Script '%s' has to be alone '%s' is ambiguous (%s) '%s' is ambiguous: %s '%s' is neither an UUID nor an interface name '%s' is not a VPN connection profile '%s' is not a name of any exiting profile '%s' is not a number '%s' is not a valid DCB flag '%s' is not a valid Ethernet MAC '%s' is not a valid Ethernet port value '%s' is not a valid FQDN '%s' is not a valid IAID '%s' is not a valid IBoIP P_Key '%s' is not a valid IPv%c address '%s' is not a valid IPv4 address '%s' is not a valid IPv4 address for '%s' option '%s' is not a valid IPv6 address '%s' is not a valid MAC address '%s' is not a valid UUID '%s' is not a valid Wi-Fi mode '%s' is not a valid band '%s' is not a valid channel '%s' is not a valid channel; use <1-13> '%s' is not a valid duplex value '%s' is not a valid handle. '%s' is not a valid hex character '%s' is not a valid interface type '%s' is not a valid key '%s' is not a valid kind '%s' is not a valid number '%s' is not a valid number (or out of range) '%s' is not a valid tunnel key '%s' is not a valid value for '%s' '%s' is not a valid value for '%s' mode connections '%s' is not a valid value for the property '%s' is not allowed as interface name '%s' is not allowed in bond_mode '%s' is not allowed in fail_mode '%s' is not allowed in lacp '%s' is not allowed in vlan_mode '%s' is not compatible with '%s' type, please change or delete the key. '%s' is not valid '%s' is not valid WEP key (it should be 5 or 13 ASCII chars) '%s' is not valid WPA PSK '%s' is not valid for the '%s' option: %s '%s' is not valid: properties should be specified as 'key=value' '%s' is not valid; 2 or 3 strings should be provided '%s' is not valid; use 'on', 'off', or 'ignore' '%s' is not valid; use = '%s' is not valid; use [%s] or [%s] '%s' is not valid; use [%s], [%s] or [%s] '%s' is now the primary connection
'%s' is out of range [% '%s' is out of range [0, %u] '%s' length is invalid (should be 5 or 6 digits) '%s' not a number between 0 and %u (inclusive) '%s' not a number between 0 and %u (inclusive) or %u '%s' not among [%s] '%s' not compatible with %s '%s', please change the key or set the right %s first. '%s' option is empty '%s' option is not valid with mode '%s' '%s' option is only valid for '%s=%s' '%s' option is only valid with mode '%s' '%s' option must be a power of 2 '%s' option requires '%s' option to be enabled '%s' option requires '%s' option to be set '%s' option should be string '%s' requires '%s' and '%s' property '%s' requires setting '%s' property '%s' security requires '%s' setting presence '%s' security requires '%s=%s' '%s' unexpected: parent already specified. '%s' value doesn't match '%s=%s' '%s': invalid group ID '%s': invalid user ID '%s::%s' is not a valid property name; '%s' is not a GObject subtype '%s=%s' is incompatible with '%s > 0' '%s=%s' is not a valid configuration for '%s' '%u' flags are not valid; use combination of %s '%u': invalid mode '--order' argument is missing 'fqdn-clear-flags' flag is incompatible with other FQDN flags 'fqdn-no-update' and 'fqdn-serv-update' flags cannot be set at the same time (No custom routes) (No support for dynamic-wep yet...) (No support for wpa-enterprise yet...) (default) (none) (unknown error) (unknown) , neither a valid setting name ---[ Main menu ]---
goto [ | ] :: go to a setting or property
remove [.] | :: remove setting or reset property value
set [. ] :: set property value
describe [.] :: describe property
print [all | [.]] :: print the connection
verify [all | fix] :: verify the connection
save [persistent|temporary] :: save the connection
activate [] [/|] :: activate the connection
back :: go one level up (back)
help/? [] :: print this help
nmcli :: nmcli configuration
quit :: exit nmcli
---[ Property menu ]---
set [] :: set new value
add [] :: add new option to the property
change :: change current value
remove [ | ] :: delete the value
describe :: describe property
print [setting | connection] :: print property (setting/connection) value(s)
back :: go to upper level
help/? [] :: print this help or command description
quit :: exit nmcli
0 (NONE) 0 (disabled) 0 (none) 6LOWPAN connection 6LOWPAN settings 6LoWPAN 802-1x settings 802.11 frequency band of the network. One of "a" for 5GHz 802.11a or "bg" for 2.4GHz 802.11. This will lock associations to the Wi-Fi network to the specific band, i.e. if "a" is specified, the device will not associate with the same network in the 2.4GHz band even if the network's settings are compatible. This setting depends on specific driver capability and may not work with all drivers. 802.1X supplicant configuration failed 802.1X supplicant disconnected 802.1X supplicant failed 802.1X supplicant took too long to authenticate 802.1x setting requires 'wpa-eap' key management 802.3ad | %s ===| nmcli interactive connection editor |=== A (5 GHz) A MCC/MNC string like "310260" or "21601" identifying the specific mobile network operator which this connection applies to. If given, the connection will apply to any device also allowed by "device-id" and "sim-id" which contains a SIM card provisioned by the given operator. A connection can not have both '%s' and '%s' settings at the same time A connection of type '%s' cannot have an ovs-interface.type "%s" A connection of type '%s' cannot have ovs-interface.type "system" A connection with '%s' setting must be of connection.type "ovs-interface" but is "%s" A connection with '%s' setting needs to be of '%s' interface type, not '%s' A connection with a '%s' setting must have a master. A connection with a '%s' setting must have the slave-type set to '%s'. Instead it is '%s' A connection with a '%s' setting must not have a master. A connection with a '%s' setting needs connection.type explicitly set A connection with ovs-interface.type '%s' setting a 'ovs-patch' setting A dependency of the connection failed A dictionary of key/value pairs with user data. This data is ignored by NetworkManager and can be used at the users discretion. The keys only support a strict ascii format, but the values can be arbitrary UTF8 strings up to a certain length. A duplicate IP address was detected A human readable unique identifier for the connection, like "Work Wi-Fi" or "T-Mobile 3G". A list of BSSIDs (each BSSID formatted as a MAC address like "00:11:22:33:44:55") that have been detected as part of the Wi-Fi network. NetworkManager internally tracks previously seen BSSIDs. The property is only meant for reading and reflects the BSSID list of NetworkManager. The changes you make to this property will not be preserved. A list of driver names to match. Each element is a shell wildcard pattern. See NMSettingMatch:interface-name for how special characters '|', '&', '!' and '\' are used for optional and mandatory matches and inverting the pattern. A list of group/broadcast encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list. For maximum compatibility leave this property empty. Each list element may be one of "wep40", "wep104", "tkip", or "ccmp". A list of interface names to match. Each element is a shell wildcard pattern. An element can be prefixed with a pipe symbol (|) or an ampersand (&). The former means that the element is optional and the latter means that it is mandatory. If there are any optional elements, than the match evaluates to true if at least one of the optional element matches (logical OR). If there are any mandatory elements, then they all must match (logical AND). By default, an element is optional. This means that an element "foo" behaves the same as "|foo". An element can also be inverted with exclamation mark (!) between the pipe symbol (or the ampersand) and before the pattern. Note that "!foo" is a shortcut for the mandatory match "&!foo". Finally, a backslash can be used at the beginning of the element (after the optional special characters) to escape the start of the pattern. For example, "&\!a" is an mandatory match for literally "!a". A list of pairwise encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list. For maximum compatibility leave this property empty. Each list element may be one of "tkip" or "ccmp". A list of paths to match against the ID_PATH udev property of devices. ID_PATH represents the topological persistent path of a device. It typically contains a subsystem string (pci, usb, platform, etc.) and a subsystem-specific identifier. For PCI devices the path has the form "pci-$domain:$bus:$device.$function", where each variable is an hexadecimal value; for example "pci-0000:0a:00.0". The path of a device can be obtained with "udevadm info /sys/class/net/$dev | grep ID_PATH=" or by looking at the "path" property exported by NetworkManager ("nmcli -f general.path device show $dev"). Each element of the list is a shell wildcard pattern. See NMSettingMatch:interface-name for how special characters '|', '&', '!' and '\' are used for optional and mandatory matches and inverting the pattern. A list of permanent MAC addresses of Wi-Fi devices to which this connection should never apply. Each MAC address should be given in the standard hex-digits-and-colons notation (eg "00:11:22:33:44:55"). A mask of group addresses to forward. Usually, group addresses in the range from 01:80:C2:00:00:00 to 01:80:C2:00:00:0F are not forwarded according to standards. This property is a mask of 16 bits, each corresponding to a group address in that range that must be forwarded. The mask can't have bits 0, 1 or 2 set because they are used for STP, MAC pause frames and LACP. A password is required to connect to '%s'. A problem with the RFC 2684 Ethernet over ADSL bridge A secondary connection of the base connection failed A slave connection with '%s' set to '%s' cannot have a '%s' setting A string containing the DHCPv6 Unique Identifier (DUID) used by the dhcp client to identify itself to DHCPv6 servers (RFC 3315). The DUID is carried in the Client Identifier option. If the property is a hex string ('aa:bb:cc') it is interpreted as a binary DUID and filled as an opaque value in the Client Identifier option. The special value "lease" will retrieve the DUID previously used from the lease file belonging to the connection. If no DUID is found and "dhclient" is the configured dhcp client, the DUID is searched in the system-wide dhclient lease file. If still no DUID is found, or another dhcp client is used, a global and permanent DUID-UUID (RFC 6355) will be generated based on the machine-id. The special values "llt" and "ll" will generate a DUID of type LLT or LL (see RFC 3315) based on the current MAC address of the device. In order to try providing a stable DUID-LLT, the time field will contain a constant timestamp that is used globally (for all profiles) and persisted to disk. The special values "stable-llt", "stable-ll" and "stable-uuid" will generate a DUID of the corresponding type, derived from the connection's stable-id and a per-host unique key. You may want to include the "${DEVICE}" or "${MAC}" specifier in the stable-id, in case this profile gets activated on multiple devices. So, the link-layer address of "stable-ll" and "stable-llt" will be a generated address derived from the stable id. The DUID-LLT time value in the "stable-llt" option will be picked among a static timespan of three years (the upper bound of the interval is the same constant timestamp used in "llt"). When the property is unset, the global value provided for "ipv6.dhcp-duid" is used. If no global value is provided, the default "lease" value is assumed. A timeout for a DHCP transaction in seconds. If zero (the default), a globally configured default is used. If still unspecified, a device specific timeout is used (usually 45 seconds). Set to 2147483647 (MAXINT32) for infinity. A timeout for the authentication. Zero means the global default; if the global default is not set, the authentication timeout is 25 seconds. A timeout for waiting Router Advertisements in seconds. If zero (the default), a globally configured default is used. If still unspecified, the timeout depends on the sysctl settings of the device. Set to 2147483647 (MAXINT32) for infinity. A universally unique identifier for the connection, for example generated with libuuid. It should be assigned when the connection is created, and never changed as long as the connection still applies to the same network. For example, it should not be changed when the "id" property or NMSettingIP4Config changes, but might need to be re-created when the Wi-Fi SSID, mobile broadband network provider, or "type" property changes. The UUID must be in the format "2815492f-7e56-435e-b2e9-246bd7cdc664" (ie, contains only hexadecimal characters and "-"). ADSL ADSL connection ADSL connection protocol. Can be "pppoa", "pppoe" or "ipoatm". APN ARP ARP targets Access Point Access point does not support 802.1x but setting requires it Access point does not support PSK but setting requires it Access point is unencrypted but setting specifies security Activate Activate a connection Activation failed: %s Active Backup Active connection details Ad-Hoc Ad-Hoc Network Ad-Hoc mode is incompatible with 802.1x security Ad-Hoc mode is incompatible with LEAP security Ad-Hoc mode requires 'none' or 'wpa-psk' key management Ad-Hoc mode requires 'open' authentication Adaptive Load Balancing (alb) Adaptive Transmit Load Balancing (tlb) Add Add... Adding a new '%s' connection Addresses Aging time Allow BSD data compression Allow Deflate data compression Allow control of Wi-Fi scans Allow control of network connections Allowed authentication methods: Allowed values for '%s' property: %s
An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the corresponding priority should transmit priority pause. An array of 8 boolean values, where the array index corresponds to the User Priority (0 - 7) and the value indicates whether or not the priority may use all of the bandwidth allocated to its assigned group. An array of 8 uint values, where the array index corresponds to the Priority Group ID (0 - 7) and the value indicates the percentage of link bandwidth allocated to that group. Allowed values are 0 - 100, and the sum of all values must total 100 percents. An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the Priority Group ID. Allowed Priority Group ID values are 0 - 7 or 15 for the unrestricted group. An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the percentage of bandwidth of the priority's assigned group that the priority may use. The sum of all percentages for priorities which belong to the same group must total 100 percents. An array of 8 uint values, where the array index corresponds to the User Priority (0 - 7) and the value indicates the traffic class (0 - 7) to which the priority is mapped. An array of strings defining what access a given user has to this connection. If this is NULL or empty, all users are allowed to access this connection; otherwise users are allowed if and only if they are in this list. When this is not empty, the connection can be active only when one of the specified users is logged into an active session. Each entry is of the form "[type]:[id]:[reserved]"; for example, "user:dcbw:blah". At this time only the "user" [type] is allowed. Any other values are ignored and reserved for future use. [id] is the username that this permission refers to, which may not contain the ":" character. Any [reserved] information present must be ignored and is reserved for future use. All of [type], [id], and [reserved] must be valid UTF-8. An http(s) address for checking internet connectivity Anonymous identity string for EAP authentication methods. Used as the unencrypted identity with EAP types that support different tunneled identity like EAP-TTLS. Are you sure you want to delete the connection '%s'? Array of IP addresses of DNS servers. Array of IP routes. Array of bridge VLAN objects. In addition to the VLANs specified here, the bridge will also have the default-pvid VLAN configured by the bridge.vlan-default-pvid property. In nmcli the VLAN list can be specified with the following syntax: $vid [pvid] [untagged] [, $vid [pvid] [untagged]]... where $vid is either a single id between 1 and 4094 or a range, represented as a couple of ids separated by a dash. Array of bridge VLAN objects. In addition to the VLANs specified here, the port will also have the default-pvid VLAN configured on the bridge by the bridge.vlan-default-pvid property. In nmcli the VLAN list can be specified with the following syntax: $vid [pvid] [untagged] [, $vid [pvid] [untagged]]... where $vid is either a single id between 1 and 4094 or a range, represented as a couple of ids separated by a dash. Ask for this password every time Authentication Authentication required by wireless network AutoIP service error AutoIP service failed AutoIP service failed to start Automatic Automatic (DHCP-only) Automatically connect Available properties: %s
Available settings: %s
Available to all users B/G (2.4 GHz) BOND BRIDGE BRIDGE PORT BSSID Back Bad '%s' option: Base type of the connection. For hardware-dependent connections, should contain the setting name of the hardware-type specific setting (ie, "802-3-ethernet" or "802-11-wireless" or "bluetooth", etc), and for non-hardware dependent connections like VPN or otherwise, should contain the setting name of that setting type (ie, "vpn" or "bridge", etc). Bluetooth Bluetooth device address Bond Bond connection Bond connection %d Bond device Bonding mode. One of "active-backup", "balance-slb", or "balance-tcp". Bonding monitoring mode Bridge Bridge VLANs %d and %d are not sorted by ascending vid Bridge connection Bridge connection %d Bridge device Bridge port Broadcast Byte-width of the serial communication. The 8 in "8n1" for example. CA certificate must be in X.509 format CDMA connection CDMA mobile broadband connection CHAP Can not change the connection type Cancel Cannot create '%s': %s Cannot set '%s' without '%s' Carrier/link changed Certificate file is empty Certificate password Channel Channel () Channel on which the mesh network to join is located. Cloned MAC [none] Cloned MAC address Closing %s failed: %s
Config directory location Config file location Configure IPv6 Privacy Extensions for SLAAC, described in RFC4941. If enabled, it makes the kernel generate a temporary IPv6 address in addition to the public one generated from MAC address via modified EUI-64. This enhances privacy, but could cause problems in some applications, on the other hand. The permitted values are: -1: unknown, 0: disabled, 1: enabled (prefer public address), 2: enabled (prefer temporary addresses). Having a per-connection setting set to "-1" (unknown) means fallback to global configuration "ipv6.ip6-privacy". If also global configuration is unspecified or set to "-1", fallback to read "/proc/sys/net/ipv6/conf/default/use_tempaddr". Note that this setting is distinct from the Stable Privacy addresses that can be enabled with the "addr-gen-mode" property's "stable-privacy" setting as another way of avoiding host tracking with IPv6 addresses. Configure the token for draft-chown-6man-tokenised-ipv6-identifiers-02 IPv6 tokenized interface identifiers. Useful with eui64 addr-gen-mode. Connected Connecting Connecting... Connection '%s' (%s) successfully added.
Connection '%s' (%s) successfully deleted.
Connection '%s' (%s) successfully modified.
Connection '%s' (%s) successfully saved.
Connection '%s' (%s) successfully updated.
Connection '%s' deactivation failed: %s
Connection '%s' successfully deactivated (D-Bus active path: %s)
Connection (name, UUID, or path): Connection is already active Connection profile details Connection sharing via a protected Wi-Fi network Connection sharing via an open Wi-Fi network Connection successfully activated (%s) (D-Bus active path: %s)
Connection successfully activated (D-Bus active path: %s)
Connection successfully reapplied to device '%s'.
Connection(s) (name, UUID, or path): Connection(s) (name, UUID, path or apath): Connectivity Connectivity is now '%s'
Constraint for server domain name. If set, this FQDN is used as a suffix match requirement for dNSName element(s) of the certificate presented by the authentication server during the inner "phase 2" authentication. If a matching dNSName is found, this constraint is met. If no dNSName values are present, this constraint is matched against SubjectName CN using same suffix match comparison. Since version 1.24, multiple valid FQDNs can be passed as a ";" delimited list. Constraint for server domain name. If set, this FQDN is used as a suffix match requirement for dNSName element(s) of the certificate presented by the authentication server. If a matching dNSName is found, this constraint is met. If no dNSName values are present, this constraint is matched against SubjectName CN using same suffix match comparison. Since version 1.24, multiple valid FQDNs can be passed as a ";" delimited list. Constraint for server domain name. If set, this list of FQDNs is used as a match requirement for dNSName element(s) of the certificate presented by the authentication server during the inner "phase 2" authentication. If a matching dNSName is found, this constraint is met. If no dNSName values are present, this constraint is matched against SubjectName CN using the same comparison. Multiple valid FQDNs can be passed as a ";" delimited list. Constraint for server domain name. If set, this list of FQDNs is used as a match requirement for dNSName element(s) of the certificate presented by the authentication server. If a matching dNSName is found, this constraint is met. If no dNSName values are present, this constraint is matched against SubjectName CN using the same comparison. Multiple valid FQDNs can be passed as a ";" delimited list. Contains the "phase 2" CA certificate if used by the EAP method specified in the "phase2-auth" or "phase2-autheap" properties. Certificate data is specified using a "scheme"; three are currently supported: blob, path and pkcs#11 URL. When using the blob scheme this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string "file://" and ending with a terminating NUL byte. This property can be unset even if the EAP method supports CA certificates, but this allows man-in-the-middle attacks and is NOT recommended. Note that enabling NMSetting8021x:system-ca-certs will override this setting to use the built-in path, if the built-in path is not a directory. Contains the "phase 2" client certificate if used by the EAP method specified in the "phase2-auth" or "phase2-autheap" properties. Certificate data is specified using a "scheme"; two are currently supported: blob and path. When using the blob scheme (which is backwards compatible with NM 0.7.x) this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string "file://" and ending with a terminating NUL byte. This property can be unset even if the EAP method supports CA certificates, but this allows man-in-the-middle attacks and is NOT recommended. Contains the "phase 2" inner private key when the "phase2-auth" or "phase2-autheap" property is set to "tls". Key data is specified using a "scheme"; two are currently supported: blob and path. When using the blob scheme and private keys, this property should be set to the key's encrypted PEM encoded data. When using private keys with the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string "file://" and ending with a terminating NUL byte. When using PKCS#12 format private keys and the blob scheme, this property should be set to the PKCS#12 data and the "phase2-private-key-password" property must be set to password used to decrypt the PKCS#12 certificate and key. When using PKCS#12 files and the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string "file://" and ending with a terminating NUL byte, and as with the blob scheme the "phase2-private-key-password" property must be set to the password used to decode the PKCS#12 private key and certificate. Contains the CA certificate if used by the EAP method specified in the "eap" property. Certificate data is specified using a "scheme"; three are currently supported: blob, path and pkcs#11 URL. When using the blob scheme this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string "file://" and ending with a terminating NUL byte. This property can be unset even if the EAP method supports CA certificates, but this allows man-in-the-middle attacks and is NOT recommended. Note that enabling NMSetting8021x:system-ca-certs will override this setting to use the built-in path, if the built-in path is not a directory. Contains the client certificate if used by the EAP method specified in the "eap" property. Certificate data is specified using a "scheme"; two are currently supported: blob and path. When using the blob scheme (which is backwards compatible with NM 0.7.x) this property should be set to the certificate's DER encoded data. When using the path scheme, this property should be set to the full UTF-8 encoded path of the certificate, prefixed with the string "file://" and ending with a terminating NUL byte. Contains the private key when the "eap" property is set to "tls". Key data is specified using a "scheme"; two are currently supported: blob and path. When using the blob scheme and private keys, this property should be set to the key's encrypted PEM encoded data. When using private keys with the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string "file://" and ending with a terminating NUL byte. When using PKCS#12 format private keys and the blob scheme, this property should be set to the PKCS#12 data and the "private-key-password" property must be set to password used to decrypt the PKCS#12 certificate and key. When using PKCS#12 files and the path scheme, this property should be set to the full UTF-8 encoded path of the key, prefixed with the string "file://" and ending with a terminating NUL byte, and as with the blob scheme the "private-key-password" property must be set to the password used to decode the PKCS#12 private key and certificate. WARNING: "private-key" is not a "secret" property, and thus unencrypted private key data using the BLOB scheme may be readable by unprivileged users. Private keys should always be encrypted with a private key password to prevent unauthorized access to unencrypted private key data. Control whether VLAN filtering is enabled on the bridge. Controls the interpretation of WEP keys. Allowed values are NM_WEP_KEY_TYPE_KEY (1), in which case the key is either a 10- or 26-character hexadecimal string, or a 5- or 13-character ASCII password; or NM_WEP_KEY_TYPE_PASSPHRASE (2), in which case the passphrase is provided as a string and will be hashed using the de-facto MD5 method to derive the actual WEP key. Controls whether IGMP snooping is enabled for this bridge. Note that if snooping was automatically disabled due to hash collisions, the system may refuse to enable the feature until the collisions are resolved. Controls whether Spanning Tree Protocol (STP) is enabled for this bridge. Controls whether per-VLAN stats accounting is enabled. Cookie Corresponds to the teamd mcast_rejoin.count. Corresponds to the teamd mcast_rejoin.interval. Corresponds to the teamd notify_peers.count. Corresponds to the teamd notify_peers.interval. Corresponds to the teamd ports.PORTIFNAME.lacp_key. Corresponds to the teamd ports.PORTIFNAME.lacp_prio. Corresponds to the teamd ports.PORTIFNAME.prio. Corresponds to the teamd ports.PORTIFNAME.queue_id. When set to -1 means the parameter is skipped from the json config. Corresponds to the teamd ports.PORTIFNAME.sticky. Corresponds to the teamd runner.active. Corresponds to the teamd runner.agg_select_policy. Corresponds to the teamd runner.fast_rate. Corresponds to the teamd runner.hwaddr_policy. Corresponds to the teamd runner.min_ports. Corresponds to the teamd runner.name. Permitted values are: "roundrobin", "broadcast", "activebackup", "loadbalance", "lacp", "random". Corresponds to the teamd runner.sys_prio. Corresponds to the teamd runner.tx_balancer.interval. Corresponds to the teamd runner.tx_balancer.name. Corresponds to the teamd runner.tx_hash. Could not activate connection: %s Could not contact NetworkManager: %s.
Could not create a software link Could not create editor for connection '%s' of type '%s'. Could not create editor for invalid connection '%s'. Could not create temporary file: %s Could not daemonize: %s [error %u]
Could not deactivate connection: %s Could not decode private key. Could not delete connection '%s': %s Could not find "%s" binary Could not find any session id for uid %d Could not generate random data. Could not load file '%s'
Could not parse arguments Could not re-read file: %s Could not retrieve session id: %s Couldn't decode PKCS#12 file: %d Couldn't decode PKCS#12 file: %s Couldn't decode PKCS#8 file: %s Couldn't decode certificate: %d Couldn't decode certificate: %s Couldn't initialize PKCS#12 decoder: %d Couldn't initialize PKCS#12 decoder: %s Couldn't initialize PKCS#8 decoder: %s Couldn't initialize slot Couldn't verify PKCS#12 file: %d Couldn't verify PKCS#12 file: %s Create Current nmcli configuration:
D-Bus service name of the VPN plugin that this setting uses to connect to its network. i.e. org.freedesktop.NetworkManager.vpnc for the vpnc plugin. DCB or FCoE setup failed DCB settings DHCP anycast MAC address [none] DHCP client error DHCP client failed DHCP client failed to start DHCP option cannot be longer than 255 characters DHCPv6 does not support the E (encoded) FQDN flag DNS servers DSL DSL authentication DSL connection %d DUN connection must include a GSM or CDMA setting DUN requested, but Bluetooth device does not support DUN Datagram Deactivate Delete Destination Detect a slave connection with '%s' set and a port type '%s'. '%s' should be set to '%s' Device Device '%s' not found Device '%s' successfully activated with '%s'.
Device '%s' successfully disconnected.
Device '%s' successfully removed.
Device LLDP neighbors Device MAC (%s) is blacklisted by the connection. Device details Device disconnected by user or client Device is now managed Device is now unmanaged Dictionary of key/value pairs of VPN plugin specific data. Both keys and values must be strings. Dictionary of key/value pairs of VPN plugin specific secrets like passwords or private keys. Both keys and values must be strings. Dictionary of key/value pairs of bonding options. Both keys and values must be strings. Option names must contain only alphanumeric characters (ie, [a-zA-Z0-9]). Disabled Disconnected by user Do you also want to clear '%s'? [yes]: Do you also want to set '%s' to '%s'? [yes]: Do you want to remove them? [yes] Don't become a daemon Don't become a daemon, and log to stderr Don't print anything Dummy Dummy connection Dummy settings Dynamic WEP (802.1x) Dynamic WEP requires 'ieee8021x' key management Dynamic WEP requires 'open' authentication Dynamic WEP requires an 802.1x setting EAP EAP key management requires '%s' setting presence ETHERNET Edit '%s' value: Edit Connection Edit a connection Edit... Editing existing '%s' connection: '%s' Editor failed: %s Egress priority maps [none] Either "dun" for Dial-Up Networking connections or "panu" for Personal Area Networking connections to devices supporting the NAP profile. Enable IGMP snooping Enable STP (Spanning Tree Protocol) Enable or disable RSTP. Enable or disable STP. Enable or disable Wi-Fi devices Enable or disable WiMAX mobile broadband devices Enable or disable connectivity checking Enable or disable device statistics Enable or disable mobile broadband devices Enable or disable multicast snooping. Enable or disable sending of multicast queries by the bridge. If not specified the option is disabled. Enable or disable system networking Enable policy routing (source routing) and set the routing table used when adding routes. This affects all routes, including device-routes, IPv4LL, DHCP, SLAAC, default-routes and static routes. But note that static routes can individually overwrite the setting by explicitly specifying a non-zero routing table. If the table setting is left at zero, it is eligible to be overwritten via global configuration. If the property is zero even after applying the global configuration value, policy routing is disabled for the address family of this connection. Policy routing disabled means that NetworkManager will add all routes to the main table (except static routes that explicitly configure a different table). Additionally, NetworkManager will not delete any extraneous routes from tables except the main table. This is to preserve backward compatibility for users who manage routing tables outside of NetworkManager. Enables or disables "hairpin mode" for the port, which allows frames to be sent back out through the port the frame was received on. Enables or disables in-line provisioning of EAP-FAST credentials when FAST is specified as the EAP method in the "eap" property. Recognized values are "0" (disabled), "1" (allow unauthenticated provisioning), "2" (allow authenticated provisioning), and "3" (allow both authenticated and unauthenticated provisioning). See the wpa_supplicant documentation for more details. Encapsulation of ADSL connection. Can be "vcmux" or "llc". Enhanced Open (OWE) Enter '%s' value: Enter a list of IPv4 addresses formatted as:
ip[/prefix], ip[/prefix],...
Missing prefix is regarded as prefix of 32.
Example: 192.168.1.5/24, 10.0.0.11/24
Enter a list of IPv4 addresses of DNS servers.
Example: 8.8.8.8, 8.8.4.4
Enter a list of IPv4 routes formatted as:
ip[/prefix] [next-hop] [metric],...
Missing prefix is regarded as a prefix of 32.
Missing next-hop is regarded as 0.0.0.0.
Missing metric means default (NM/kernel will set a default value).
Examples: 192.168.2.0/24 192.168.2.1 3, 10.1.0.0/16 10.0.0.254
10.1.2.0/24
Enter a list of IPv4 routing rules formatted as:
priority [prio] [from [src]] [to [dst]], ,...
Enter a list of IPv6 addresses formatted as:
ip[/prefix], ip[/prefix],...
Missing prefix is regarded as prefix of 128.
Example: 2607:f0d0:1002:51::4/64, 1050:0:0:0:5:600:300c:326b
Enter a list of IPv6 addresses of DNS servers. If the IPv6 configuration method is 'auto' these DNS servers are appended to those (if any) returned by automatic configuration. DNS servers cannot be used with the 'shared' or 'link-local' IPv6 configuration methods, as there is no upstream network. In all other IPv6 configuration methods, these DNS servers are used as the only DNS servers for this connection.
Example: 2607:f0d0:1002:51::4, 2607:f0d0:1002:51::1
Enter a list of IPv6 routes formatted as:
ip[/prefix] [next-hop] [metric],...
Missing prefix is regarded as a prefix of 128.
Missing next-hop is regarded as "::".
Missing metric means default (NM/kernel will set a default value).
Examples: 2001:db8:beef:2::/64 2001:db8:beef::2, 2001:db8:beef:3::/64 2001:db8:beef::3 2
abbe::/64 55
Enter a list of IPv6 routing rules formatted as:
priority [prio] [from [src]] [to [dst]], ,...
Enter a list of S/390 options formatted as:
option = , option = ,...
Valid options are: %s
Enter a list of bonding options formatted as:
option = , option = ,...
Valid options are: %s
'mode' can be provided as a name or a number:
balance-rr = 0
active-backup = 1
balance-xor = 2
broadcast = 3
802.3ad = 4
balance-tlb = 5
balance-alb = 6
Example: mode=2,miimon=120
Enter a list of link watchers formatted as dictionaries where the keys are teamd properties. Dictionary pairs are in the form: key=value and pairs are separated by ' '. Dictionaries are separated with ','.
The keys allowed/required in the dictionary change on the basis of the link watcher type, while the only property common to all the link watchers is 'name'*, which defines the link watcher to be specified.
Properties available for the 'ethtool' link watcher:
'delay-up', 'delay-down'
Properties available for the 'nsna_ping' link watcher:
'init-wait', 'interval', 'missed-max', 'target-host'*
Properties available for the 'arp_ping' include all the ones for 'nsna_ping' and:
'source-host'*, 'validate-active', 'validate-inactive', 'send-always'.
Properties flagged with a '*' are mandatory.
Example:
name=arp_ping source-host=172.16.1.1 target-host=172.16.1.254, name=ethtool delay-up=3
Enter a list of subchannels (comma or space separated).
Example: 0.0.0e20 0.0.0e21 0.0.0e22
Enter a list of user permissions. This is a list of user names formatted as:
[user:], [user:],...
The items can be separated by commas or spaces.
Example: alice bob charlie
Enter a value which indicates whether the connection is subject to a data
quota, usage costs or other limitations. Accepted options are:
'true','yes','on' to set the connection as metered
'false','no','off' to set the connection as not metered
'unknown' to let NetworkManager choose a value using some heuristics
Enter bytes as a list of hexadecimal values.
Two formats are accepted:
(a) a string of hexadecimal digits, where each two digits represent one byte
(b) space-separated list of bytes written as hexadecimal digits (with optional 0x/0X prefix, and optional leading 0).
Examples: ab0455a6ea3a74C2
ab 4 55 0xa6 ea 3a 74 C2
Enter connection type: Enter file path to CA certificate (optionally prefixed with file://).
[file://]
Note that nmcli does not support specifying certificates as raw blob data.
Example: /home/cimrman/cacert.crt
Enter file path to CA certificate for inner authentication (optionally prefixed
with file://).
[file://]
Note that nmcli does not support specifying certificates as raw blob data.
Example: /home/cimrman/ca-zweite-phase.crt
Enter file path to client certificate (optionally prefixed with file://).
[file://]
Note that nmcli does not support specifying certificates as raw blob data.
Example: /home/cimrman/jara.crt
Enter file path to client certificate for inner authentication (optionally prefixed
with file://).
[file://]
Note that nmcli does not support specifying certificates as raw blob data.
Example: /home/cimrman/jara-zweite-phase.crt
Enter path to a private key and the key password (if not set yet):
[file://] []
Note that nmcli does not support specifying private key as raw blob data.
Example: /home/cimrman/jara-priv-key Dardanely
Enter secondary connections that should be activated when this connection is
activated. Connections can be specified either by UUID or ID (name). nmcli
transparently translates names to UUIDs. Note that NetworkManager only supports
VPNs as secondary connections at the moment.
The items can be separated by commas or spaces.
Example: private-openvpn, fe6ba5d8-c2fc-4aae-b2e3-97efddd8d9a7
Enter the type of WEP keys. The accepted values are: 0 or unknown, 1 or key, and 2 or passphrase.
Error initializing certificate data: %s Error reading nmcli output: %s
Error updating secrets for %s: %s
Error writing nmcli output: %s
Error: %s
Error: %s - no such connection profile. Error: %s argument is missing. Error: %s properties, nor it is a setting name.
Error: %s. Error: %s.
Error: %s: %s. Error: '%s' argument is missing. Error: '%s' argument is required. Error: '%s' cannot repeat. Error: '%s' is ambiguous (%s.%s or %s.%s). Error: '%s' is not a valid argument for '%s' option. Error: '%s' is not a valid monitoring mode; use '%s' or '%s'.
Error: '%s' is not a valid timeout. Error: '%s' is not an active connection.
Error: '%s' is not valid argument for '%s' option. Error: '%s' setting not present in the connection
Error: '--fields' value '%s' is not valid here (allowed field: %s) Error: 'autoconnect': %s. Error: 'bt-type': '%s' not valid; use [%s, %s, %s (%s), %s]. Error: 'connection show': %s Error: 'device lldp list': %s Error: 'device show': %s Error: 'device status': %s Error: 'device wifi': %s Error: 'file' argument is required. Error: 'general logging': %s Error: 'general permissions': %s Error: 'managed': %s. Error: 'monitor' command '%s' is not valid. Error: 'networking' command '%s' is not valid. Error: 'save': %s. Error: 'type' argument is required. Error: argument is missing. Error: . argument is missing. Error: Access point with bssid '%s' not found. Error: Argument '%s' was expected, but '%s' provided. Error: BSSID to connect to (%s) differs from bssid argument (%s). Error: Cannot activate connection: %s.
Error: Connection '%s' exists but properties don't match. Error: Connection activation failed.
Error: Connection activation failed: %s Error: Connection activation failed: (%d) %s.
Error: Connection deletion failed: %s
Error: Could not create NMClient object: %s
Error: Could not create NMClient object: %s. Error: Device '%s' (%s) deletion failed: %s
Error: Device '%s' (%s) disconnecting failed: %s
Error: Device '%s' is not a Wi-Fi device. Error: Device '%s' not found. Error: Device '%s' not found.
Error: Device '%s' supports neither AP nor Ad-Hoc mode. Error: Device '%s' was not recognized as a Wi-Fi device, check NetworkManager Wi-Fi plugin. Error: Device activation failed: %s Error: Failed to activate '%s' (%s) connection: %s
Error: Failed to activate connection: %s Error: Failed to add '%s' connection: %s Error: Failed to add/activate new connection: %s Error: Failed to modify connection '%s': %s Error: Failed to save '%s' (%s) connection: %s
Error: Failed to scan hidden SSID: %s. Error: Failed to setup a Wi-Fi hotspot: %s Error: Invalid 'password': %s. Error: NetworkManager is not running. Error: No Wi-Fi device found. Error: No access point with BSSID '%s' found. Error: No arguments provided. Error: No connection specified. Error: No interface specified. Error: No network with SSID '%s' found. Error: No property specified. Error: Option '%s' is unknown, try 'nmcli -help'. Error: Option '--pretty' is mutually exclusive with '--terse'. Error: Option '--pretty' is specified the second time. Error: Option '--terse' is mutually exclusive with '--pretty'. Error: Option '--terse' is specified the second time. Error: Parameter '%s' is neither SSID nor BSSID. Error: Reading applied connection from device '%s' (%s) failed: %s Error: Reapplying connection to device '%s' (%s) failed: %s Error: SSID or BSSID are missing. Error: Timeout %d sec expired. Error: Timeout expired (%d seconds) Error: Timeout saving '%s' (%s) connection
Error: Unexpected argument '%s' Error: Unknown connection '%s'. Error: argument '%s' not understood. Try passing --help instead. Error: bad connection type: %s Error: band argument value '%s' is invalid; use 'a' or 'bg'. Error: bssid argument value '%s' is not a valid BSSID. Error: cannot delete unknown connection(s): %s. Error: channel '%s' not valid for band '%s'. Error: channel requires band too. Error: connection is not saved. Type 'save' first.
Error: connection is not valid: %s
Error: connection verification failed: %s
Error: extra argument '%s' Error: extra argument not allowed: '%s'. Error: failed to %s %s.%s: %s. Error: failed to create temporary file %s. Error: failed to export '%s': %s. Error: failed to find VPN plugin for %s. Error: failed to import '%s': %s. Error: failed to load VPN plugin: %s. Error: failed to load connection: %s. Error: failed to read temporary file '%s': %s. Error: failed to reload connections: %s. Error: failed to reload: %s Error: failed to remove value of '%s': %s
Error: failed to set '%s' property: %s
Error: failed to set Wi-Fi radio: %s Error: failed to set hostname: %s Error: failed to set logging: %s Error: failed to set networking: %s Error: invalid '%s' argument: '%s' (use on/off). Error: invalid . '%s'. Error: invalid argument '%s'
Error: invalid connection type; %s
Error: invalid connection type; %s. Error: invalid extra argument '%s'. Error: invalid or not allowed setting '%s': %s. Error: invalid property '%s': %s. Error: invalid property: %s
Error: invalid property: %s%s
Error: invalid property: %s, neither a valid setting name.
Error: invalid rescan argument: '%s' not among [auto, no, yes] Error: invalid setting argument '%s'. Error: invalid setting argument '%s'; valid are [%s]
Error: invalid setting name; %s
Error: invalid slave type; %s. Error: master is required Error: missing argument for '%s' option. Error: missing argument. Try passing --help. Error: missing setting for '%s' property
Error: missing setting. Error: nmcli terminated by signal %s (%d) Error: no active connection provided. Error: no argument given; valid are [%s]
Error: no setting selected; valid are [%s]
Error: not all active connections found. Error: not all connections deleted. Error: not all connections found. Error: not all devices deleted. Error: not all devices disconnected. Error: not all devices found. Error: only one of 'id', 'filename', uuid, or 'path' can be provided. Error: only these fields are allowed: %s Error: openconnect failed with signal %d
Error: openconnect failed with status %d
Error: openconnect failed: %s Error: openconnect failed: %s
Error: polkit agent failed: %s
Error: polkit agent initialization failed: %s Error: property %s
Error: property '%s' is not known. Error: save-confirmation: %s
Error: secret agent initialization failed Error: setting '%s' is mandatory and cannot be removed. Error: show-secrets: %s
Error: ssid is too long. Error: status-line: %s
Error: the connection is not VPN. Error: timeout creating NMClient object
Error: unknown extra argument: '%s'. Error: unknown setting '%s'
Error: unknown setting: '%s'
Error: value for '%s' argument is required. Error: value for '%s' is missing. Error: wep-key-type argument value '%s' is invalid, use 'key' or 'phrase'. Ethernet Ethernet connection %d Ethernet device Ethtool settings Exit immediately if NetworkManager is not running or connecting Expected a line break following '%s'
Expected a value for '%s'
Expected whitespace following '%s'
FALSE if the connection can be modified using the provided settings service's D-Bus interface with the right privileges, or TRUE if the connection is read-only and cannot be modified. FQDN flags requires a FQDN set Failed to configure SR-IOV parameters Failed to create WireGuard connection: %s Failed to create pager pipe: %s
Failed to decode PKCS#8 private key. Failed to decode certificate. Failed to decrypt the private key. Failed to decrypt the private key: %d. Failed to decrypt the private key: %s (%s) Failed to decrypt the private key: decrypted data too large. Failed to decrypt the private key: unexpected padding length. Failed to determine AP security information Failed to duplicate pager pipe: %s
Failed to encrypt the data: %s (%s) Failed to encrypt: %d. Failed to finalize decryption of the private key: %d. Failed to find expected PKCS#8 end tag '%s'. Failed to find expected PKCS#8 start tag. Failed to find expected TSS end tag '%s'. Failed to find expected TSS start tag. Failed to fork pager: %s
Failed to initialize the crypto engine. Failed to initialize the crypto engine: %d. Failed to initialize the decryption cipher context: %s (%s) Failed to initialize the decryption cipher slot. Failed to initialize the decryption context. Failed to initialize the encryption cipher context: %s (%s) Failed to initialize the encryption cipher slot. Failed to initialize the encryption context. Failed to read configuration: %s
Failed to recognize certificate Failed to register with the requested network Failed to select the specified APN Failed to set IV for decryption. Failed to set IV for encryption. Failed to set symmetric key for decryption. Failed to set symmetric key for encryption. File to import: Flags indicating how to handle the "ca-cert-password" property. Flags indicating how to handle the "client-cert-password" property. Flags indicating how to handle the "leap-password" property. Flags indicating how to handle the "mka-cak" property. Flags indicating how to handle the "password" property. Flags indicating how to handle the "password-raw" property. Flags indicating how to handle the "phase2-ca-cert-password" property. Flags indicating how to handle the "phase2-client-cert-password" property. Flags indicating how to handle the "phase2-private-key-password" property. Flags indicating how to handle the "pin" property. Flags indicating how to handle the "private-key" property. Flags indicating how to handle the "private-key-password" property. Flags indicating how to handle the "psk" property. Flags indicating how to handle the "wep-key0", "wep-key1", "wep-key2", and "wep-key3" properties. Flags indicating which mode of WPS is to be used if any. There's little point in changing the default setting as NetworkManager will automatically determine whether it's feasible to start WPS enrollment from the Access Point capabilities. WPS can be disabled by setting this property to a value of 1. Flags indicating which mode of WPS is to be used. There's little point in changing the default setting as NetworkManager will automatically determine the best method to use. For incoming packets, a list of mappings from 802.1p priorities to Linux SKB priorities. The mapping is given in the format "from:to" where both "from" and "to" are unsigned integers, ie "7:3". For outgoing packets, a list of mappings from Linux SKB priorities to 802.1p priorities. The mapping is given in the format "from:to" where both "from" and "to" are unsigned integers, ie "7:3". Forces use of the new PEAP label during key derivation. Some RADIUS servers may require forcing the new PEAP label to interoperate with PEAPv1. Set to "1" to force use of the new PEAP label. See the wpa_supplicant documentation for more details. Forces which PEAP version is used when PEAP is set as the EAP method in the "eap" property. When unset, the version reported by the server will be used. Sometimes when using older RADIUS servers, it is necessary to force the client to use a particular PEAP version. To do so, this property may be set to "0" or "1" to force that specific PEAP version. Forward delay GRE GROUP GSM Modem's SIM PIN required GSM Modem's SIM PUK required GSM Modem's SIM card not inserted GSM Modem's SIM wrong GSM connection GSM mobile broadband connection GVRP, Gateway Gateway certificate hash General settings Generic settings Group ID [none] Group forward mask Group password HTTP proxy password Hairpin mode Hello time Hide Hint: "nmcli dev wifi show-password" shows the Wi-Fi name and password.
Hint: use '%s' to get more details. Hostname Hostname set to '%s'
Hotspot password: %s
How many additional levels of encapsulation are permitted to be prepended to packets. This property applies only to IPv6 tunnels. IEEE 802.15.4 IEEE 802.15.4 (WPAN) parent device or connection UUID IEEE 802.15.4 Personal Area Network (PAN) identifier. IEEE 802.15.4 channel page. A positive integer or -1, meaning "do not set, use whatever the device is already set to". IEEE 802.15.4 channel. A positive integer or -1, meaning "do not set, use whatever the device is already set to". INFINIBAND IP Tunnel IP configuration could not be reserved (no available address, timeout, etc.) IP configuration method. NMSettingIP4Config and NMSettingIP6Config both support "disabled", "auto", "manual", and "link-local". See the subclass-specific documentation for other values. In general, for the "auto" method, properties such as "dns" and "routes" specify information that is added on to the information returned from automatic configuration. The "ignore-auto-routes" and "ignore-auto-dns" properties modify this behavior. For methods that imply no upstream network, such as "shared" or "link-local", these properties must be empty. For IPv4 method "shared", the IP subnet can be configured by adding one manual IPv4 address or otherwise 10.42.x.0/24 is chosen. Note that the shared method must be configured on the interface which shares the internet to a subnet, not on the uplink which is shared. IP tunnel IP tunnel connection IP tunnel connection %d IP-tunnel settings IP6GRE IP6IP6 IPIP IPIP6 IPTunnel IPv4 CONFIGURATION IPv4 address (IP[/plen]) [none] IPv4 gateway [none] IPv4 protocol IPv6 CONFIGURATION IPv6 address (IP[/plen]) [none] IPv6 gateway [none] IPv6 protocol ISATAP IV contains non-hexadecimal digits. IV must be an even number of bytes in length. IV must contain at least 8 characters Identifies specific subchannels that this network device uses for communication with z/VM or s390 host. Like the "mac-address" property for non-z/VM devices, this property can be used to ensure this connection only applies to the network device that uses these subchannels. The list should contain exactly 3 strings, and each string may only be composed of hexadecimal characters and the period (.) character. Identity Identity string for EAP authentication methods. Often the user's user or login name. If TRUE the IFF_VNET_HDR the tunnel packets will include a virtio network header. If TRUE the interface will prepend a 4 byte header describing the physical interface to the packets. If TRUE, "deflate" compression will not be requested. If TRUE, 128-bit MPPE (Microsoft Point-to-Point Encryption) will be required for the PPP session, and the "require-mppe" property must also be set to TRUE. If 128-bit MPPE is not available the session will fail. If TRUE, BSD compression will not be requested. If TRUE, MPPE (Microsoft Point-to-Point Encryption) will be required for the PPP session. If either 64-bit or 128-bit MPPE is not available the session will fail. Note that MPPE is not used on mobile broadband connections. If TRUE, Van Jacobsen TCP header compression will not be requested. If TRUE, a hostname is sent to the DHCP server when acquiring a lease. Some DHCP servers use this hostname to update DNS databases, essentially providing a static hostname for the computer. If the "dhcp-hostname" property is NULL and this property is TRUE, the current persistent hostname of the computer is sent. If TRUE, allow overall network configuration to proceed even if the configuration specified by this property times out. Note that at least one IP configuration must succeed or overall network configuration will still fail. For example, in IPv6-only networks, setting this property to TRUE on the NMSettingIP4Config allows the overall network configuration to succeed if IPv4 configuration fails but IPv6 configuration completes successfully. If TRUE, do not require the other side (usually the PPP server) to authenticate itself to the client. If FALSE, require authentication from the remote side. In almost all cases, this should be TRUE. If TRUE, indicates that the network is a non-broadcasting network that hides its SSID. This works both in infrastructure and AP mode. In infrastructure mode, various workarounds are used for a more reliable discovery of hidden networks, such as probe-scanning the SSID. However, these workarounds expose inherent insecurities with hidden SSID networks, and thus hidden SSID networks should be used with caution. In AP mode, the created network does not broadcast its SSID. Note that marking the network as hidden may be a privacy issue for you (in infrastructure mode) or client stations (in AP mode), as the explicit probe-scans are distinctly recognizable on the air. If TRUE, specify that pppd should set the serial port to use hardware flow control with RTS and CTS signals. This value should normally be set to FALSE. If TRUE, stateful MPPE is used. See pppd documentation for more information on stateful MPPE. If TRUE, the CHAP authentication method will not be used. If TRUE, the EAP authentication method will not be used. If TRUE, the MSCHAP authentication method will not be used. If TRUE, the MSCHAPv2 authentication method will not be used. If TRUE, the PAP authentication method will not be used. If TRUE, this connection will never be the default connection for this IP type, meaning it will never be assigned the default route by NetworkManager. If configured, set to a Manufacturer Usage Description (MUD) URL that points to manufacturer-recommended network policies for IoT devices. It is transmitted as a DHCPv4 or DHCPv6 option. The value must be a valid URL starting with "https://". The special value "none" is allowed to indicate that no MUD URL is used. If the per-profile value is unspecified (the default), a global connection default gets consulted. If still unspecified, the ultimate default is "none". If enabled the bridge's own IP address is used as the source address for IGMP queries otherwise the default of 0.0.0.0 is used. If given, specifies the parent interface name on which this PPPoE connection should be created. If this property is not specified, the connection is activated on the interface specified in "interface-name" of NMSettingConnection. If given, specifies the parent interface name or parent connection UUID from which this 6LowPAN interface should be created. If given, specifies the parent interface name or parent connection UUID from which this MAC-VLAN interface should be created. If this property is not specified, the connection must contain an "802-3-ethernet" setting with a "mac-address" property. If given, specifies the parent interface name or parent connection UUID from which this MACSEC interface should be created. If this property is not specified, the connection must contain an "802-3-ethernet" setting with a "mac-address" property. If given, specifies the parent interface name or parent connection UUID from which this VLAN interface should be created. If this property is not specified, the connection must contain an "802-3-ethernet" setting with a "mac-address" property. If given, specifies the parent interface name or parent connection UUID the new device will be bound to so that tunneled packets will only be routed via that interface. If given, specifies the parent interface name or parent connection UUID. If given, specifies the source IP address to use in outgoing packets. If greater than zero, delay success of IP addressing until either the timeout is reached, or an IP gateway replies to a ping. If no queries are seen after this delay (in deciseconds) has passed, the bridge will start to send its own queries. If non-zero, directs the device to only use the specified bitrate for communication with the access point. Units are in Kb/s, ie 5500 = 5.5 Mbit/s. This property is highly driver dependent and not all devices support setting a static bitrate. If non-zero, directs the device to use the specified transmit power. Units are dBm. This property is highly driver dependent and not all devices support setting a static transmit power. If non-zero, instruct pppd to presume the connection to the peer has failed if the specified number of LCP echo-requests go unanswered by the peer. The "lcp-echo-interval" property must also be set to a non-zero value if this property is used. If non-zero, instruct pppd to request that the peer send packets no larger than the specified size. If non-zero, the MRU should be between 128 and 16384. If non-zero, instruct pppd to send an LCP echo-request frame to the peer every n seconds (where n is the specified value). Note that some PPP peers will respond to echo requests and some will not, and it is not possible to autodetect this. If non-zero, instruct pppd to send packets no larger than the specified size. If non-zero, instruct pppd to set the serial port to the specified baudrate. This value should normally be left as 0 to automatically choose the speed. If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple Ethernet frames. If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple fragments. If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple fragments. If zero a default MTU is used. Note that contrary to wg-quick's MTU setting, this does not take into account the current routes at the time of activation. If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames. If specified, The MAC address of the multicast group this bridge uses for STP. The address must be a link-local address in standard Ethernet MAC address format, ie an address of the form 01:80:C2:00:00:0X, with X in [0, 4..F]. If not specified the default value is 01:80:C2:00:00:00. If specified, instruct PPPoE to only initiate sessions with access concentrators that provide the specified service. For most providers, this should be left blank. It is only required if there are multiple access concentrators or a specific service is known to be required. If specified, request that the device use this MAC address instead. This is known as MAC cloning or spoofing. Beside explicitly specifying a MAC address, the special values "preserve", "permanent", "random" and "stable" are supported. "preserve" means not to touch the MAC address on activation. "permanent" means to use the permanent hardware address if the device has one (otherwise this is treated as "preserve"). "random" creates a random MAC address on each connect. "stable" creates a hashed MAC address based on connection.stable-id and a machine dependent key. If unspecified, the value can be overwritten via global defaults, see manual of NetworkManager.conf. If still unspecified, it defaults to "preserve" (older versions of NetworkManager may use a different default value). On D-Bus, this field is expressed as "assigned-mac-address" or the deprecated "cloned-mac-address". If specified, request that the device use this MAC address instead. This is known as MAC cloning or spoofing. Beside explicitly specifying a MAC address, the special values "preserve", "permanent", "random" and "stable" are supported. "preserve" means not to touch the MAC address on activation. "permanent" means to use the permanent hardware address of the device. "random" creates a random MAC address on each connect. "stable" creates a hashed MAC address based on connection.stable-id and a machine dependent key. If unspecified, the value can be overwritten via global defaults, see manual of NetworkManager.conf. If still unspecified, it defaults to "preserve" (older versions of NetworkManager may use a different default value). On D-Bus, this field is expressed as "assigned-mac-address" or the deprecated "cloned-mac-address". If specified, the MAC address of bridge. When creating a new bridge, this MAC address will be set. If this field is left unspecified, the "ethernet.cloned-mac-address" is referred instead to generate the initial MAC address. Note that setting "ethernet.cloned-mac-address" anyway overwrites the MAC address of the bridge later while activating the bridge. Hence, this property is deprecated. Deprecated: 1 If specified, the password used with magic-packet-based Wake-on-LAN, represented as an Ethernet MAC address. If NULL, no password will be required. If specified, the protocol used for VLAN filtering. Supported values are: '802.1Q', '802.1ad'. If not specified the default value is '802.1Q'. If specified, this connection will never apply to the Ethernet device whose permanent MAC address matches an address in the list. Each MAC address is in the standard hex-digits-and-colons notation (00:11:22:33:44:55). If specified, this connection will only apply to the Ethernet device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing). If specified, this connection will only apply to the IEEE 802.15.4 (WPAN) MAC layer device whose permanent MAC address matches. If specified, this connection will only apply to the IPoIB device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing). If specified, this connection will only apply to the Wi-Fi device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing). If specified, this connection will only apply to the WiMAX device whose MAC address matches. This property does not change the MAC address of the device (known as MAC spoofing). Deprecated: 1 If the "dhcp-send-hostname" property is TRUE, then the specified FQDN will be sent to the DHCP server when acquiring a lease. This property and "dhcp-hostname" are mutually exclusive and cannot be set at the same time. If the "dhcp-send-hostname" property is TRUE, then the specified name will be sent to the DHCP server when acquiring a lease. This property and "dhcp-fqdn" are mutually exclusive and cannot be set at the same time. If the SIM is locked with a PIN it must be unlocked before any other operations are requested. Specify the PIN here to allow operation of the device. If the VPN connection requires a user name for authentication, that name should be provided here. If the connection is available to more than one user, and the VPN requires each user to supply a different name, then leave this property empty. If this property is empty, NetworkManager will automatically supply the username of the user which requested the VPN connection. If the VPN service supports persistence, and this property is TRUE, the VPN will attempt to stay connected across link changes and outages, until explicitly disconnected. If the property is set to TRUE, the interface will support multiple file descriptors (queues) to parallelize packet sending or receiving. Otherwise, the interface will only support a single queue. If you are creating a VPN, and the VPN connection you wish to create does not appear in the list, you may not have the correct VPN plugin installed. Ignore Ignore automatically obtained DNS parameters Ignore automatically obtained routes Index 0 WEP key. This is the WEP key used in most networks. See the "wep-key-type" property for a description of how this key is interpreted. Index 1 WEP key. This WEP index is not used by most networks. See the "wep-key-type" property for a description of how this key is interpreted. Index 2 WEP key. This WEP index is not used by most networks. See the "wep-key-type" property for a description of how this key is interpreted. Index 3 WEP key. This WEP index is not used by most networks. See the "wep-key-type" property for a description of how this key is interpreted. Indicates whether Fast Initial Link Setup (802.11ai) must be enabled for the connection. One of NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT (0) (use global default value), NM_SETTING_WIRELESS_SECURITY_FILS_DISABLE (1) (disable FILS), NM_SETTING_WIRELESS_SECURITY_FILS_OPTIONAL (2) (enable FILS if the supplicant and the access point support it) or NM_SETTING_WIRELESS_SECURITY_FILS_REQUIRED (3) (enable FILS and fail if not supported). When set to NM_SETTING_WIRELESS_SECURITY_FILS_DEFAULT (0) and no global default is set, FILS will be optionally enabled. Indicates whether Protected Management Frames (802.11w) must be enabled for the connection. One of NM_SETTING_WIRELESS_SECURITY_PMF_DEFAULT (0) (use global default value), NM_SETTING_WIRELESS_SECURITY_PMF_DISABLE (1) (disable PMF), NM_SETTING_WIRELESS_SECURITY_PMF_OPTIONAL (2) (enable PMF if the supplicant and the access point support it) or NM_SETTING_WIRELESS_SECURITY_PMF_REQUIRED (3) (enable PMF and fail if not supported). When set to NM_SETTING_WIRELESS_SECURITY_PMF_DEFAULT (0) and no global default is set, PMF will be optionally enabled. InfiniBand InfiniBand P_Key connection did not specify parent interface name InfiniBand connection InfiniBand connection %d InfiniBand device does not support connected mode Info: %s
Infra Ingress priority maps [none] Input key Interface name of the master device or UUID of the master connection. Interface(s): Interface: Internal config file location Interval (in deciseconds) between queries sent by the bridge after the end of the startup phase. Invalid IPv4 address '%s' Invalid IPv4 address prefix '%u' Invalid IPv6 address '%s' Invalid IPv6 address prefix '%u' Invalid IV length (must be at least %u). Invalid MAC in the blacklist: %s. Invalid configuration option '%s'; allowed [%s]
Invalid device Bluetooth address. Invalid device MAC address %s. Invalid device MAC address. Invalid option. Please use --help to see a list of valid options. Invalid peer starting at %s:%zu: %s Invalid routing metric '%s' Invalid secrets Invalid verify option: %s
JSON configuration Key LACP mode. One of "active", "off", or "passive". LEAP LEAP authentication is incompatible with 802.1x setting LEAP authentication is incompatible with Ad-Hoc mode LEAP authentication requires IEEE 802.1x key management LEAP authentication requires a LEAP username LEAP username requires 'leap' authentication LOOSE_BINDING, Legacy setting that used to help establishing PPP data sessions for GSM-based modems. Deprecated: 1 Like ip4-auto-default-route, but for the IPv6 default route. Link down delay Link monitoring Link up delay Link watchers configuration for the connection: each link watcher is defined by a dictionary, whose keys depend upon the selected link watcher. Available link watchers are 'ethtool', 'nsna_ping' and 'arp_ping' and it is specified in the dictionary with the key 'name'. Available keys are: ethtool: 'delay-up', 'delay-down', 'init-wait'; nsna_ping: 'init-wait', 'interval', 'missed-max', 'target-host'; arp_ping: all the ones in nsna_ping and 'source-host', 'validate-active', 'validate-inactive', 'send-always'. See teamd.conf man for more details. Link-Local List of plugins separated by ',' List of strings specifying the allowed WPA protocol versions to use. Each element may be one "wpa" (allow WPA) or "rsn" (allow WPA2/RSN). If not specified, both WPA and RSN connections are allowed. List of strings to be matched against the altSubjectName of the certificate presented by the authentication server during the inner "phase 2" authentication. If the list is empty, no verification of the server certificate's altSubjectName is performed. List of strings to be matched against the altSubjectName of the certificate presented by the authentication server. If the list is empty, no verification of the server certificate's altSubjectName is performed. Local IP Local address [none] Local endpoint [none] Log domains separated by ',': any combination of [%s] Log level: one of [%s] MAC [none] MACVLAN MACVLAN connection MACVLAN parent device or connection UUID MACsec MACsec EAP authentication MACsec PSK authentication MACsec connection MACsec parent device or connection UUID MII (recommended) MKA CAK MKA_CKN MSCHAP MSCHAPv2 MTU MUD URL is not a valid URL MVRP, Make all warnings fatal Malformed PEM file: DEK-Info was not the second tag. Malformed PEM file: Proc-Type was not first tag. Malformed PEM file: invalid format of IV in DEK-Info tag. Malformed PEM file: no IV found in DEK-Info tag. Malformed PEM file: unknown Proc-Type tag '%s'. Malformed PEM file: unknown private key cipher '%s'. Manual Master connection failed Match Max age Mesh Method for proxy configuration, Default is NM_SETTING_PROXY_METHOD_NONE (0) Method returned type '%s', but expected '%s' Metric Missing %s in arp_ping link watcher Missing IPv4 address Missing IPv6 address Missing ovs interface setting Missing ovs interface type Missing target-host in nsna_ping link watcher Mobile Broadband Mobile broadband connection %d Mobile broadband network password Mode Modem failed or no longer available Modem initialization failed Modem now ready and available ModemManager is unavailable Modify network connections for all users Modify persistent global DNS configuration Modify persistent system hostname Modify personal network connections Monitoring connection activation (press any key to continue)
Monitoring frequency Must specify a P_Key if specifying parent N/A NAME Necessary firmware for the device may be missing Network Service Provider (NSP) name of the WiMAX network this connection should use. Deprecated: 1 Network registration denied Network registration timed out NetworkManager TUI NetworkManager active profiles NetworkManager connection profiles NetworkManager has started NetworkManager has stopped NetworkManager is not running NetworkManager is not running. NetworkManager logging NetworkManager monitors all network connections and automatically
chooses the best connection to use. It also allows the user to
specify wireless access points which wireless cards in the computer
should associate with. NetworkManager options NetworkManager permissions NetworkManager status NetworkManager went to sleep Networking Networkmanager is not running (waiting for it)
Networkmanager is now in the '%s' state
Never use this network for default route New Connection New connection activation was enqueued New connection name: Next Hop No carrier could be established No connection specified No custom routes are defined. No dial tone No interface specified No reason given No service name specified No such connection '%s' No valid secrets None Not a valid PAC Script Not searching for networks Number of stop bits for communication on the serial port. Either 1 or 2. The 1 in "8n1" for example. OK OLPC Mesh OLPC Mesh connection One custom route %d custom routes One of NM_SETTING_MAC_RANDOMIZATION_DEFAULT (0) (never randomize unless the user has set a global default to randomize and the supplicant supports randomization), NM_SETTING_MAC_RANDOMIZATION_NEVER (1) (never randomize the MAC address), or NM_SETTING_MAC_RANDOMIZATION_ALWAYS (2) (always randomize the MAC address). This property is deprecated for 'cloned-mac-address'. Deprecated: 1 One of NM_SETTING_WIRELESS_POWERSAVE_DISABLE (2) (disable Wi-Fi power saving), NM_SETTING_WIRELESS_POWERSAVE_ENABLE (3) (enable Wi-Fi power saving), NM_SETTING_WIRELESS_POWERSAVE_IGNORE (1) (don't touch currently configure setting) or NM_SETTING_WIRELESS_POWERSAVE_DEFAULT (0) (use the globally configured value). All other values are reserved. One or more flags which control the behavior and features of the VLAN interface. Flags include NM_VLAN_FLAG_REORDER_HEADERS (0x1) (reordering of output packet headers), NM_VLAN_FLAG_GVRP (0x2) (use of the GVRP protocol), and NM_VLAN_FLAG_LOOSE_BINDING (0x4) (loose binding of the interface to its master device's operating state). NM_VLAN_FLAG_MVRP (0x8) (use of the MVRP protocol). The default value of this property is NM_VLAN_FLAG_REORDER_HEADERS, but it used to be 0. To preserve backward compatibility, the default-value in the D-Bus API continues to be 0 and a missing property on D-Bus is still considered as 0. Open System Open vSwitch Bridge Open vSwitch DPDK device arguments. Open vSwitch DPDK interface settings Open vSwitch Interface Open vSwitch Port Open vSwitch bridge settings Open vSwitch database connection failed Open vSwitch interface settings Open vSwitch patch interface settings Open vSwitch port settings Opening %s failed: %s
Output file name: Output key PAC URL PAC URL for obtaining PAC file. PAC script PAN Identifier (<0x0000-0xffff>) PAN connection PAN connections cannot specify GSM, CDMA, or serial settings PAN requested, but Bluetooth device does not support NAP PAP PCI PEM certificate had no end tag '%s'. PEM certificate had no start tag '%s'. PEM key file had no end tag '%s'. PEM key file had no start tag PIN PIN check failed PIN code is needed for the mobile broadband device PIN code required PIN used for EAP authentication methods. PPP PPP CONFIGURATION PPP failed PPP service disconnected PPP service failed to start PPP settings PPPoE PPPoE connection PPPoE parent device PPPoE username P_KEY [none] Page () Parent Parent device [none] Parent interface [none] Parity setting of the serial port. Password Password [none] Password must be UTF-8 Password provided, but key was not encrypted. Password used for EAP authentication methods, given as a byte array to allow passwords in other encodings than UTF-8 to be used. If both the "password" property and the "password-raw" property are specified, "password" is preferred. Password used to authenticate with the ADSL service. Password used to authenticate with the PPPoE service. Password: Passwords or encryption keys are required to access the wireless network '%s'. Path cost Peer Perform a checkpoint or rollback of interfaces configuration Please select an option Plugin file does not exist (%s) Plugin is not a valid file (%s) Pre-Shared-Key for WPA networks. For WPA-PSK, it's either an ASCII passphrase of 8 to 63 characters that is (as specified in the 802.11i standard) hashed to derive the actual key, or the key in form of 64 hexadecimal character. The WPA3-Personal networks use a passphrase of any length for SAE authentication. Prefix Preshared-key for %s Primary Print NetworkManager configuration and exit Print NetworkManager version and exit Priority Private key password Profile name Property name? Proxy Put NetworkManager to sleep or wake it up (should only be used by system power management) Quit Quit after initial configuration REORDER_HEADERS, Radio switches Reload NetworkManager configuration Remote Remote IP Remove Require 128-bit encryption Require IPv4 addressing for this connection Require IPv6 addressing for this connection Round-robin Routing SIM PIN was incorrect SIM operator ID must be a 5 or 6 number MCCMNC code SIT SR-IOV settings SSID SSID length is out of range <1-32> bytes SSID of the Wi-Fi network. Must be specified. SSID of the mesh network to join. SSID or BSSID: Saving the connection with 'autoconnect=yes'. That might result in an immediate activation of the connection.
Do you still want to save? %s Search domains Secrets are required for the DSL connection '%s' Secrets are required to access the MACsec network '%s' Secrets are required to access the wired network '%s' Secrets are required to connect WireGuard VPN '%s' Secrets were required, but not provided Security Select the type of connection you wish to create. Select the type of slave connection you wish to add. Select... Send PPP echo packets Serial settings Service Service [none] Set Hostname Set delay (in deciseconds) after which the bridge will leave a group, if no membership reports for this group are received. Set hostname to '%s' Set interval (in deciseconds) between queries to find remaining members of a group, after a "leave" message is received. Set maximum size of multicast hash table (value must be a power of 2). Set system hostname Set the Max Response Time/Max Response Delay (in deciseconds) for IGMP/MLD queries sent by the bridge. Set the number of IGMP queries to send during startup phase. Set the number of queries the bridge will send before stopping forwarding a multicast group after a "leave" message has been received. Sets the Spanning Tree Protocol (STP) priority for this bridge. Lower values are "better"; the lowest priority bridge will be elected the root bridge. Sets the time (in deciseconds) between queries sent out at startup to determine membership information. Setting '%s' is not present in the connection.
Setting name of the device type of this slave's master connection (eg, "bond"), or NULL if this connection is not a slave. Setting name? Shared Shared Key Shared connection service failed Shared connection service failed to start Short IEEE 802.15.4 address to be used within a restricted environment. Short address (<0x0000-0xffff>) Show Show NetworkManager options Show password Slave connections need a valid '%s' property Slaves Specific port type to use if the device supports multiple attachment methods. One of "tp" (Twisted Pair), "aui" (Attachment Unit Interface), "bnc" (Thin Ethernet) or "mii" (Media Independent Interface). If the device supports only one port type, this setting is ignored. Specifies authentication flags to use in "phase 1" outer authentication using NMSetting8021xAuthFlags options. The individual TLS versions can be explicitly disabled. If a certain TLS disable flag is not set, it is up to the supplicant to allow or forbid it. The TLS options map to tls_disable_tlsv1_x settings. See the wpa_supplicant documentation for more details. Specifies how the CAK (Connectivity Association Key) for MKA (MACsec Key Agreement) is obtained. Specifies the NMSettingDcbFlags for DCB Priority Flow Control (PFC). Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4). Specifies the NMSettingDcbFlags for DCB Priority Groups. Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4). Specifies the NMSettingDcbFlags for the DCB FCoE application. Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4). Specifies the NMSettingDcbFlags for the DCB FIP application. Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4). Specifies the NMSettingDcbFlags for the DCB iSCSI application. Flags may be any combination of NM_SETTING_DCB_FLAG_ENABLE (0x1), NM_SETTING_DCB_FLAG_ADVERTISE (0x2), and NM_SETTING_DCB_FLAG_WILLING (0x4). Specifies the TOS value to use in outgoing packets. Specifies the UDP destination port to communicate to the remote VXLAN tunnel endpoint. Specifies the VXLAN Network Identifier (or VXLAN Segment Identifier) to use. Specifies the lifetime in seconds of FDB entries learnt by the kernel. Specifies the maximum UDP source port to communicate to the remote VXLAN tunnel endpoint. Specifies the maximum number of FDB entries. A value of zero means that the kernel will store unlimited entries. Specifies the minimum UDP source port to communicate to the remote VXLAN tunnel endpoint. Specifies the name of the interface for the other side of the patch. The patch on the other side must also set this interface as peer. Specifies the time-to-live value to use in outgoing packets. Specifies the unicast destination IP address to use in outgoing packets when the destination link layer address is not known in the VXLAN device forwarding database, or the multicast IP address to join. Specifies the validation mode for incoming frames. Specifies whether ARP proxy is turned on. Specifies whether netlink IP ADDR miss notifications are generated. Specifies whether netlink LL ADDR miss notifications are generated. Specifies whether route short circuit is turned on. Specifies whether the SCI (Secure Channel Identifier) is included in every packet. Specifies whether the profile can be active multiple times at a particular moment. The value is of type NMConnectionMultiConnect. Specifies whether unknown source link layer addresses and IP addresses are entered into the VXLAN device forwarding database. Specify the location of a PID file Speed to use for communication over the serial port. Note that this value usually has no effect for mobile broadband modems as they generally ignore speed settings and use the highest available speed. State file for no-auto-default devices State file location Status of devices Substring to be matched against the subject of the certificate presented by the authentication server during the inner "phase 2" authentication. When unset, no verification of the authentication server certificate's subject is performed. This property provides little security, if any, and its use is deprecated in favor of NMSetting8021x:phase2-domain-suffix-match. Substring to be matched against the subject of the certificate presented by the authentication server. When unset, no verification of the authentication server certificate's subject is performed. This property provides little security, if any, and its use is deprecated in favor of NMSetting8021x:domain-suffix-match. Success System config directory location System policy prevents Wi-Fi scans System policy prevents control of network connections System policy prevents enabling or disabling Wi-Fi devices System policy prevents enabling or disabling WiMAX mobile broadband devices System policy prevents enabling or disabling connectivity checking System policy prevents enabling or disabling device statistics System policy prevents enabling or disabling mobile broadband devices System policy prevents enabling or disabling system networking System policy prevents modification of network settings for all users System policy prevents modification of personal network settings System policy prevents modification of the persistent global DNS configuration System policy prevents modification of the persistent system hostname System policy prevents putting NetworkManager to sleep or waking it up System policy prevents reloading NetworkManager System policy prevents sharing connections via a protected Wi-Fi network System policy prevents sharing connections via an open Wi-Fi network System policy prevents the creation of a checkpoint or its rollback TEAM TEAM PORT TUN connection Team Team JSON configuration [none] Team connection Team connection %d Team device Team port The 256 bit private-key in base64 encoding. The Bluetooth address of the device. The Bluetooth addresses of the device and the connection didn't match. The Bluetooth connection failed or timed out The Ethernet MAC address aging time, in seconds. The GPRS Access Point Name specifying the APN used when establishing a data session with the GSM-based network. The APN often determines how the user will be billed for their network usage and whether the user has access to the Internet or just a provider-specific walled-garden, so it is important to use the correct APN for the user's mobile broadband plan. The APN may only be composed of the characters a-z, 0-9, ., and - per GSM 03.60 Section 14.9. The IP configuration is no longer valid The IP-over-InfiniBand transport mode. Either "datagram" or "connected". The JSON configuration for the team network interface. The property should contain raw JSON configuration data suitable for teamd, because the value is passed directly to teamd. If not specified, the default configuration is used. See man teamd.conf for the format details. The JSON configuration for the team port. The property should contain raw JSON configuration data suitable for teamd, because the value is passed directly to teamd. If not specified, the default configuration is used. See man teamd.conf for the format details. The MACs of the device and the connection didn't match. The MACs of the device and the connection do not match. The NMSettingWiredWakeOnLan options to enable. Not all devices support all options. May be any combination of NM_SETTING_WIRED_WAKE_ON_LAN_PHY (0x2), NM_SETTING_WIRED_WAKE_ON_LAN_UNICAST (0x4), NM_SETTING_WIRED_WAKE_ON_LAN_MULTICAST (0x8), NM_SETTING_WIRED_WAKE_ON_LAN_BROADCAST (0x10), NM_SETTING_WIRED_WAKE_ON_LAN_ARP (0x20), NM_SETTING_WIRED_WAKE_ON_LAN_MAGIC (0x40) or the special values NM_SETTING_WIRED_WAKE_ON_LAN_DEFAULT (0x1) (to use global settings) and NM_SETTING_WIRED_WAKE_ON_LAN_IGNORE (0x8000) (to disable management of Wake-on-LAN in NetworkManager). The NMSettingWirelessWakeOnWLan options to enable. Not all devices support all options. May be any combination of NM_SETTING_WIRELESS_WAKE_ON_WLAN_ANY (0x2), NM_SETTING_WIRELESS_WAKE_ON_WLAN_DISCONNECT (0x4), NM_SETTING_WIRELESS_WAKE_ON_WLAN_MAGIC (0x8), NM_SETTING_WIRELESS_WAKE_ON_WLAN_GTK_REKEY_FAILURE (0x10), NM_SETTING_WIRELESS_WAKE_ON_WLAN_EAP_IDENTITY_REQUEST (0x20), NM_SETTING_WIRELESS_WAKE_ON_WLAN_4WAY_HANDSHAKE (0x40), NM_SETTING_WIRELESS_WAKE_ON_WLAN_RFKILL_RELEASE (0x80), NM_SETTING_WIRELESS_WAKE_ON_WLAN_TCP (0x100) or the special values NM_SETTING_WIRELESS_WAKE_ON_WLAN_DEFAULT (0x1) (to use global settings) and NM_SETTING_WIRELESS_WAKE_ON_WLAN_IGNORE (0x8000) (to disable management of Wake-on-LAN in NetworkManager). The Network ID (GSM LAI format, ie MCC-MNC) to force specific network registration. If the Network ID is specified, NetworkManager will attempt to force the device to register only on the specified network. This can be used to ensure that the device does not roam when direct roaming control of the device is not otherwise possible. The SIM card unique identifier (as given by the WWAN management service) which this connection applies to. If given, the connection will apply to any device also allowed by "device-id" which contains a SIM card matching the given identifier. The Spanning Tree Protocol (STP) forwarding delay, in seconds. The Spanning Tree Protocol (STP) hello time, in seconds. The Spanning Tree Protocol (STP) maximum message age, in seconds. The Spanning Tree Protocol (STP) port cost for destinations via this port. The Spanning Tree Protocol (STP) priority of this bridge port. The TTL to assign to tunneled packets. 0 is a special value meaning that packets inherit the TTL value. The VLAN identifier that the interface created by this connection should be assigned. The valid range is from 0 to 4094, without the reserved id 4095. The VLAN identifiers of the device and the connection didn't match. The VLAN mode. One of "access", "native-tagged", "native-untagged", "trunk" or unset. The VLAN tag in the range 0-4095. The VPN service did not start in time The VPN service failed to start The VPN service returned invalid configuration The VPN service stopped unexpectedly The VRF table of the device and the connection didn't match. The VXLAN identifiers of the device and the connection didn't match. The Wi-Fi Display (WFD) Information Elements (IEs) to set. Wi-Fi Display requires a protocol specific information element to be set in certain Wi-Fi frames. These can be specified here for the purpose of establishing a connection. This setting is only useful when implementing a Wi-Fi Display client. The Wi-Fi P2P peer could not be found The Wi-Fi network could not be found The allowed EAP method to be used when authenticating to the network with 802.1x. Valid methods are: "leap", "md5", "tls", "peap", "ttls", "pwd", and "fast". Each method requires different configuration using the properties of this setting; refer to wpa_supplicant documentation for the allowed combinations. The base network connection was interrupted The bridge failure mode. One of "secure", "standalone" or empty. The connection and device differ in S390 subchannels. The connection attempt timed out The connection did not specify an interface name. The connection is not saved. Do you really want to quit? %s The connection is of Bluetooth NAP type. The connection profile has been removed from another client. You may type 'save' in the main menu to restore it.
The connection profile has been removed from another client. You may type 'save' to restore it.
The connection was disconnected The connection was not a Bluetooth connection. The connection was not a MAC-VLAN connection. The connection was not a VLAN connection. The connection was not a VRF connection. The connection was not a VXLAN connection. The connection was not a Wi-Fi P2P connection. The connection was not a Wi-Fi connection. The connection was not a bond connection. The connection was not a bridge connection. The connection was not a dummy connection. The connection was not a generic connection. The connection was not a modem connection. The connection was not a ovs_bridge connection. The connection was not a ovs_interface connection. The connection was not a ovs_port connection. The connection was not a team connection. The connection was not a tun connection. The connection was not a valid modem connection. The connection was not a wpan connection. The connection was not an ADSL connection. The connection was not an Ethernet or PPPoE connection. The connection was not an IP tunnel connection. The connection was not an InfiniBand connection. The connection was not an OLPC Mesh connection. The connection was not valid: %s The connection was removed The data path type. One of "system", "netdev" or empty. The default PVID for the ports of the bridge, that is the VLAN id assigned to incoming untagged frames. The default metric for routes that don't explicitly specify a metric. The default value -1 means that the metric is chosen automatically based on the device type. The metric applies to dynamic routes, manual (static) routes that don't have an explicit metric setting, address prefix routes, and the default route. Note that for IPv6, the kernel accepts zero (0) but coerces it to 1024 (user default). Hence, setting this property to zero effectively mean setting it to 1024. For IPv4, zero is a regular value for the metric. The device could not be readied for configuration The device disappeared The device is lacking Bluetooth capabilities required by the connection. The device is lacking WPA capabilities required by the connection. The device is lacking WPA2/RSN capabilities required by the connection. The device is lacking capabilities required by the connection. The device parent's management changed The device unique identifier (as given by the WWAN management service) which this connection applies to. If given, the connection will only apply to the specified device. The device was removed The device's active connection disappeared The device's existing connection was assumed The device's parent changed The dialing attempt failed The dialing request timed out The error cannot be fixed automatically.
The expected start of the response The flow label to assign to tunnel packets. This property applies only to IPv6 tunnels. The group ID which will own the device. If set to NULL everyone will be able to use the device. The hardware address of the device and the connection didn't match. The highest User Priority (0 - 7) which FCoE frames should use, or -1 for default priority. Only used when the "app-fcoe-flags" property includes the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag. The highest User Priority (0 - 7) which FIP frames should use, or -1 for default priority. Only used when the "app-fip-flags" property includes the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag. The highest User Priority (0 - 7) which iSCSI frames should use, or -1 for default priority. Only used when the "app-iscsi-flags" property includes the NM_SETTING_DCB_FLAG_ENABLE (0x1) flag. The interface name of the parent device of this device. Normally NULL, but if the "p_key" property is set, then you must specify the base device by setting either this property or "mac-address". The interface names of the device and the connection didn't match The interface type. Either "internal", "system", "patch", "dpdk", or empty. The interval between connectivity checks (in seconds) The key used for tunnel input packets; the property is valid only for certain tunnel modes (GRE, IP6GRE). If empty, no key is used. The key used for tunnel output packets; the property is valid only for certain tunnel modes (GRE, IP6GRE). If empty, no key is used. The line is busy The listen-port. If listen-port is not specified, the port will be chosen randomly when the interface comes up. The local endpoint of the tunnel; the value can be empty, otherwise it must contain an IPv4 or IPv6 address. The login password for legacy LEAP connections (ie, key-mgmt = "ieee8021x" and auth-alg = "leap"). The login username for legacy LEAP connections (ie, key-mgmt = "ieee8021x" and auth-alg = "leap"). The macvlan mode, which specifies the communication mechanism between multiple macvlans on the same lower device. The mode of the device and the connection didn't match The modem could not be found The name of the WireGuard config must be a valid interface name followed by ".conf" The name of the network interface this connection is bound to. If not set, then the connection can be attached to any interface of the appropriate type (subject to restrictions imposed by other settings). For software devices this specifies the name of the created device. For connection types where interface names cannot easily be made persistent (e.g. mobile broadband or USB Ethernet), this property should not be used. Setting this property restricts the interfaces a connection can be used with, and if interface names change or are reordered the connection may be applied to the wrong interface. The number of times a connection should be tried when autoactivating before giving up. Zero means forever, -1 means the global default (4 times if not overridden). Setting this to 1 means to try activation only once before blocking autoconnect. Note that after a timeout, NetworkManager will try to autoconnect again. The number to dial to establish the connection to the CDMA-based mobile broadband network, if any. If not specified, the default number (#777) is used when required. The operating mode of the virtual device. Allowed values are NM_SETTING_TUN_MODE_TUN (1) to create a layer 3 device and NM_SETTING_TUN_MODE_TAP (2) to create an Ethernet-like layer 2 one. The password used to access the "phase2" CA certificate stored in "phase2-ca-cert" property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login. The password used to access the "phase2" client certificate stored in "phase2-client-cert" property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login. The password used to access the CA certificate stored in "ca-cert" property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login. The password used to access the client certificate stored in "client-cert" property. Only makes sense if the certificate is stored on a PKCS#11 token that requires a login. The password used to authenticate with the network, if required. Many providers do not require a password, or accept any password. But if a password is required, it is specified here. The password used to decrypt the "phase 2" private key specified in the "phase2-private-key" property when the private key either uses the path scheme, or is a PKCS#12 format key. The password used to decrypt the private key specified in the "private-key" property when the private key either uses the path scheme, or if the private key is a PKCS#12 format key. The port component of the SCI (Secure Channel Identifier), between 1 and 65534. The remote endpoint of the tunnel; the value must contain an IPv4 or IPv6 address. The routing table for this VRF. The selected IP method is not supported The supplicant is now available The time port must be active before it starts forwarding traffic. The time port must be inactive in order to be considered down. The time, in seconds since the Unix Epoch, that the connection was last _successfully_ fully activated. NetworkManager updates the connection timestamp periodically when the connection is active to ensure that an active connection has the latest timestamp. The property is only meant for reading (changes to this property will not be preserved). The total number of virtual functions to create. Note that when the sriov setting is present NetworkManager enforces the number of virtual functions on the interface (also when it is zero) during activation and resets it upon deactivation. To prevent any changes to SR-IOV parameters don't add a sriov setting to the connection. The trust level of a the connection. Free form case-insensitive string (for example "Home", "Work", "Public"). NULL or unspecified zone means the connection will be placed in the default zone as defined by the firewall. When updating this property on a currently activated connection, the change takes effect immediately. The tunneling mode, for example NM_IP_TUNNEL_MODE_IPIP (1) or NM_IP_TUNNEL_MODE_GRE (2). The type of service (IPv4) or traffic class (IPv6) field to be set on tunneled packets. The user ID which will own the device. If set to NULL everyone will be able to use the device. The username used to authenticate with the network, if required. Many providers do not require a username, or accept any username. But if a username is required, it is specified here. The valid syntax is: '[-] [pvid] [untagged]' The valid syntax is: '[root | parent ] [handle ] ' The valid syntax is: 'ip[/prefix] [next-hop] [metric] [attribute=val]... [,ip[/prefix] ...]' The valid syntax is: vf [attribute=value]... [,vf [attribute=value]...] There's no primary connection
Time to delay between each byte sent to the modem, in microseconds. Timeout for the VPN service to establish the connection. Some services may take quite a long time to connect. Value of 0 means a default timeout, which is 60 seconds (unless overridden by vpn.timeout in configuration file). Values greater than zero mean timeout in seconds. Timeout in milliseconds used to check for the presence of duplicate IP addresses on the network. If an address conflict is detected, the activation will fail. A zero value means that no duplicate address detection is performed, -1 means the default value (either configuration ipvx.dad-timeout override or zero). A value greater than zero is a timeout in milliseconds. The property is currently implemented only for IPv4. Traffic controls Transport mode Tun Tun device Type 'describe [.]' for detailed property description. Type 'help' or '?' for available commands. Type 'print' to show all the connection properties. URI is empty URI is not valid UTF-8 URI not NUL terminated USB UTF-8 encoded file path containing PAC for EAP-FAST. UTF-8 encoded password used for EAP authentication methods. If both the "password" property and the "password-raw" property are specified, "password" is preferred. UTF-8 encoded path to a directory containing PEM or DER formatted certificates to be added to the verification chain in addition to the certificate specified in the "ca-cert" property. If NMSetting8021x:system-ca-certs is enabled and the built-in CA path is an existing directory, then this setting is ignored. UTF-8 encoded path to a directory containing PEM or DER formatted certificates to be added to the verification chain in addition to the certificate specified in the "phase2-ca-cert" property. If NMSetting8021x:system-ca-certs is enabled and the built-in CA path is an existing directory, then this setting is ignored. Unable to add new connection: %s Unable to delete connection: %s Unable to determine private key type. Unable to save connection: %s Unable to set hostname: %s Unexpected amount of data after encrypting. Unexpected end of file following '%s'
Unexpected failure to normalize the connection Unexpected failure to verify the connection Unknown Unknown command argument: '%s'
Unknown command: '%s'
Unknown error Unknown log domain '%s' Unknown log level '%s' Unknown reason Unknown slave type '%s' Unknown/unhandled Bluetooth connection type Unsupported extra-argument Unsupported key cipher for decryption Unsupported key cipher for encryption Unsupported to-string-flags argument Usage Usage: nmcli [OPTIONS] OBJECT { COMMAND | help }
OPTIONS
-a, --ask ask for missing parameters
-c, --colors auto|yes|no whether to use colors in output
-e, --escape yes|no escape columns separators in values
-f, --fields |all|common specify fields to output
-g, --get-values |all|common shortcut for -m tabular -t -f
-h, --help print this help
-m, --mode tabular|multiline output mode
-o, --overview overview mode
-p, --pretty pretty output
-s, --show-secrets allow displaying passwords
-t, --terse terse output
-v, --version show program version
-w, --wait set timeout waiting for finishing operations
OBJECT
g[eneral] NetworkManager's general status and operations
n[etworking] overall networking control
r[adio] NetworkManager radio switches
c[onnection] NetworkManager's connections
d[evice] devices managed by NetworkManager
a[gent] NetworkManager secret agent or polkit agent
m[onitor] monitor NetworkManager changes
Usage: nmcli agent all { help }
Runs nmcli as both NetworkManager secret and a polkit agent.
Usage: nmcli agent polkit { help }
Registers nmcli as a polkit action for the user session.
When a polkit daemon requires an authorization, nmcli asks the user and gives
the response back to polkit.
Usage: nmcli agent secret { help }
Runs nmcli as NetworkManager secret agent. When NetworkManager requires
a password it asks registered agents for it. This command keeps nmcli running
and if a password is required asks the user for it.
Usage: nmcli agent { COMMAND | help }
COMMAND := { secret | polkit | all }
Usage: nmcli connection clone { ARGUMENTS | help }
ARGUMENTS := [--temporary] [id | uuid | path]
Clone an existing connection profile. The newly created connection will be
the exact copy of the , except the uuid property (will be generated) and
id (provided as argument).
Usage: nmcli connection down { ARGUMENTS | help }
ARGUMENTS := [id | uuid | path | apath] ...
Deactivate a connection from a device (without preventing the device from
further auto-activation). The profile to deactivate is identified by its name,
UUID or D-Bus path.
Usage: nmcli connection edit { ARGUMENTS | help }
ARGUMENTS := [id | uuid | path]
Edit an existing connection profile in an interactive editor.
The profile is identified by its name, UUID or D-Bus path
ARGUMENTS := [type ] [con-name ]
Add a new connection profile in an interactive editor.
Usage: nmcli connection export { ARGUMENTS | help }
ARGUMENTS := [id | uuid | path] []
Export a connection. Only VPN connections are supported at the moment.
The data are directed to standard output or to a file if a name is given.
Usage: nmcli connection import { ARGUMENTS | help }
ARGUMENTS := [--temporary] type file
Import an external/foreign configuration as a NetworkManager connection profile.
The type of the input file is specified by type option.
Only VPN configurations are supported at the moment. The configuration
is imported by NetworkManager VPN plugins.
Usage: nmcli connection load { ARGUMENTS | help }
ARGUMENTS := [...]
Load/reload one or more connection files from disk. Use this after manually
editing a connection file to ensure that NetworkManager is aware of its latest
state.
Usage: nmcli connection modify { ARGUMENTS | help }
ARGUMENTS := [id | uuid | path] ([+|-]. )+
Modify one or more properties of the connection profile.
The profile is identified by its name, UUID or D-Bus path. For multi-valued
properties you can use optional '+' or '-' prefix to the property name.
The '+' sign allows appending items instead of overwriting the whole value.
The '-' sign allows removing selected items instead of the whole value.
ARGUMENTS := remove
Remove a setting from the connection profile.
Examples:
nmcli con mod home-wifi wifi.ssid rakosnicek
nmcli con mod em1-1 ipv4.method manual ipv4.addr "192.168.1.2/24, 10.10.1.5/8"
nmcli con mod em1-1 +ipv4.dns 8.8.4.4
nmcli con mod em1-1 -ipv4.dns 1
nmcli con mod em1-1 -ipv6.addr "abbe::cafe/56"
nmcli con mod bond0 +bond.options mii=500
nmcli con mod bond0 -bond.options downdelay
nmcli con mod em1-1 remove sriov
Usage: nmcli connection monitor { ARGUMENTS | help }
ARGUMENTS := [id | uuid | path] ...
Monitor connection profile activity.
This command prints a line whenever the specified connection changes.
Monitors all connection profiles in case none is specified.
Usage: nmcli connection reload { help }
Reload all connection files from disk.
Usage: nmcli connection show { ARGUMENTS | help }
ARGUMENTS := [--active] [--order ]
List in-memory and on-disk connection profiles, some of which may also be
active if a device is using that connection profile. Without a parameter, all
profiles are listed. When --active option is specified, only the active
profiles are shown. --order allows custom connection ordering (see manual page).
ARGUMENTS := [--active] [id | uuid | path | apath] ...
Show details for specified connections. By default, both static configuration
and active connection data are displayed. It is possible to filter the output
using global '--fields' option. Refer to the manual page for more information.
When --active option is specified, only the active profiles are taken into
account. Use global --show-secrets option to reveal associated secrets as well.
Usage: nmcli connection up { ARGUMENTS | help }
ARGUMENTS := [id | uuid | path] [ifname ] [ap ] [nsp ] [passwd-file ]
Activate a connection on a device. The profile to activate is identified by its
name, UUID or D-Bus path.
ARGUMENTS := ifname [ap ] [nsp ] [passwd-file ]
Activate a device with a connection. The connection profile is selected
automatically by NetworkManager.
ifname - specifies the device to active the connection on
ap - specifies AP to connect to (only valid for Wi-Fi)
nsp - specifies NSP to connect to (only valid for WiMAX)
passwd-file - file with password(s) required to activate the connection
Usage: nmcli connection { COMMAND | help }
COMMAND := { show | up | down | add | modify | clone | edit | delete | monitor | reload | load | import | export }
show [--active] [--order ]
show [--active] [id | uuid | path | apath] ...
up [[id | uuid | path] ] [ifname ] [ap ] [passwd-file ]
down [id | uuid | path | apath] ...
add COMMON_OPTIONS TYPE_SPECIFIC_OPTIONS SLAVE_OPTIONS IP_OPTIONS [-- ([+|-]. )+]
modify [--temporary] [id | uuid | path] ([+|-]. )+
clone [--temporary] [id | uuid | path ]
edit [id | uuid | path]
edit [type ] [con-name ]
delete [id | uuid | path]
monitor [id | uuid | path] ...
reload
load [ ... ]
import [--temporary] type file
export [id | uuid | path] []
Usage: nmcli device connect { ARGUMENTS | help }
ARGUMENTS :=
Connect the device.
NetworkManager will try to find a suitable connection that will be activated.
It will also consider connections that are not set to auto-connect.
Usage: nmcli device delete { ARGUMENTS | help }
ARGUMENTS := ...
Delete the software devices.
The command removes the interfaces. It only works for software devices
(like bonds, bridges, etc.). Hardware devices cannot be deleted by the
command.
Usage: nmcli device disconnect { ARGUMENTS | help }
ARGUMENTS := ...
Disconnect devices.
The command disconnects the device and prevents it from auto-activating
further connections without user/manual intervention.
Usage: nmcli device lldp { ARGUMENTS | help }
ARGUMENTS := [list [ifname ]]
List neighboring devices discovered through LLDP. The 'ifname' option can be
used to list neighbors for a particular interface.
Usage: nmcli device monitor { ARGUMENTS | help }
ARGUMENTS := [] ...
Monitor device activity.
This command prints a line whenever the specified devices change state.
Monitors all devices in case no interface is specified.
Usage: nmcli device reapply { ARGUMENTS | help }
ARGUMENTS :=
Attempts to update device with changes to the currently active connection
made since it was last applied.
Usage: nmcli device set { ARGUMENTS | help }
ARGUMENTS := DEVICE { PROPERTY [ PROPERTY ... ] }
DEVICE := [ifname]
PROPERTY := { autoconnect { yes | no } |
{ managed { yes | no }
Modify device properties.
Usage: nmcli device show { ARGUMENTS | help }
ARGUMENTS := []
Show details of device(s).
The command lists details for all devices, or for a given device.
Usage: nmcli device status { help }
Show status for all devices.
By default, the following columns are shown:
DEVICE - interface name
TYPE - device type
STATE - device state
CONNECTION - connection activated on device (if any)
Displayed columns can be changed using '--fields' global option. 'status' is
the default command, which means 'nmcli device' calls 'nmcli device status'.
Usage: nmcli device wifi { ARGUMENTS | help }
Perform operation on Wi-Fi devices.
ARGUMENTS := [list [ifname ] [bssid ] [--rescan yes|no|auto]]
List available Wi-Fi access points. The 'ifname' and 'bssid' options can be
used to list APs for a particular interface, or with a specific BSSID. The
--rescan flag tells whether a new Wi-Fi scan should be triggered.
ARGUMENTS := connect <(B)SSID> [password ] [wep-key-type key|phrase] [ifname ]
[bssid ] [name ] [private yes|no] [hidden yes|no]
Connect to a Wi-Fi network specified by SSID or BSSID. The command finds a
matching connection or creates one and then activates it on a device. This
is a command-line counterpart of clicking an SSID in a GUI client. If a
connection for the network already exists, it is possible to bring up the
existing profile as follows: nmcli con up id . Note that only open,
WEP and WPA-PSK networks are supported if no previous connection exists.
It is also assumed that IP configuration is obtained via DHCP.
ARGUMENTS := hotspot [ifname ] [con-name ] [ssid ]
[band a|bg] [channel ] [password ]
Create a Wi-Fi hotspot. Use 'connection down' or 'device disconnect'
to stop the hotspot.
Parameters of the hotspot can be influenced by the optional parameters:
ifname - Wi-Fi device to use
con-name - name of the created hotspot connection profile
ssid - SSID of the hotspot
band - Wi-Fi band to use
channel - Wi-Fi channel to use
password - password to use for the hotspot
ARGUMENTS := rescan [ifname ] [[ssid ] ...]
Request that NetworkManager immediately re-scan for available access points.
NetworkManager scans Wi-Fi networks periodically, but in some cases it might
be useful to start scanning manually. 'ssid' allows scanning for a specific
SSID, which is useful for APs with hidden SSIDs. More 'ssid' parameters can be
given. Note that this command does not show the APs,
use 'nmcli device wifi list' for that.
Usage: nmcli device { COMMAND | help }
COMMAND := { status | show | set | connect | reapply | modify | disconnect | delete | monitor | wifi | lldp }
status
show []
set [ifname] [autoconnect yes|no] [managed yes|no]
connect
reapply
modify ([+|-]. )+
disconnect ...
delete ...
monitor ...
wifi [list [ifname ] [bssid ] [--rescan yes|no|auto]]
wifi connect <(B)SSID> [password ] [wep-key-type key|phrase] [ifname ]
[bssid ] [name ] [private yes|no] [hidden yes|no]
wifi hotspot [ifname ] [con-name ] [ssid ] [band a|bg] [channel ] [password ]
wifi rescan [ifname ] [[ssid ] ...]
wifi show-password [ifname ]
lldp [list [ifname ]]
Usage: nmcli general hostname { ARGUMENTS | help }
ARGUMENTS := []
Get or change persistent system hostname.
With no arguments, this prints currently configured hostname. When you pass
a hostname, NetworkManager will set it as the new persistent system hostname.
Usage: nmcli general logging { ARGUMENTS | help }
ARGUMENTS := [level ] [domains ]
Get or change NetworkManager logging level and domains.
Without any argument current logging level and domains are shown. In order to
change logging state, provide level and/or domain. Please refer to the man page
for the list of possible logging domains.
Usage: nmcli general permissions { help }
Show caller permissions for authenticated operations.
Usage: nmcli general status { help }
Show overall status of NetworkManager.
'status' is the default action, which means 'nmcli gen' calls 'nmcli gen status'
Usage: nmcli monitor
Monitor NetworkManager changes.
Prints a line whenever a change occurs in NetworkManager
Usage: nmcli networking connectivity { ARGUMENTS | help }
ARGUMENTS := [check]
Get network connectivity state.
The optional 'check' argument makes NetworkManager re-check the connectivity.
Usage: nmcli networking off { help }
Switch networking off.
Usage: nmcli networking on { help }
Switch networking on.
Usage: nmcli networking { COMMAND | help }
COMMAND := { [ on | off | connectivity ] }
on
off
connectivity [check]
Usage: nmcli radio all { ARGUMENTS | help }
ARGUMENTS := [on | off]
Get status of all radio switches, or turn them on/off.
Usage: nmcli radio wifi { ARGUMENTS | help }
ARGUMENTS := [on | off]
Get status of Wi-Fi radio switch, or turn it on/off.
Usage: nmcli radio wwan { ARGUMENTS | help }
ARGUMENTS := [on | off]
Get status of mobile broadband radio switch, or turn it on/off.
Usage: nmcli radio { COMMAND | help }
COMMAND := { all | wifi | wwan }
all | wifi | wwan [ on | off ]
Use "nmcli device show" to get complete information about known devices and
"nmcli connection show" to get an overview on active connection profiles.
Consult nmcli(1) and nmcli-examples(7) manual pages for complete usage details.
Use TCP header compression Use point-to-point encryption (MPPE) Use stateful MPPE User ID [none] User settings Username Username [none] Username used to authenticate with the ADSL service. Username used to authenticate with the PPPoE service. VCI of ADSL connection VF with index %u, but the total number of VFs is %u VFs %d and %d are not sorted by ascending index VLAN VLAN ID (<0-4094>) VLAN connection VLAN connection %d VLAN flags (<0-7>) [none] VLAN id VLAN parent device or connection UUID VPI of ADSL connection VPN VPN connected VPN connecting VPN connecting (getting IP configuration) VPN connecting (need authentication) VPN connecting (prepare) VPN connection VPN connection %d VPN connection (name, UUID, or path): VPN connection failed VPN disconnected VPN password required VRF VRF connection VTI VTI6 VXLAN VXLAN ID VXLAN connection Valid connection types: %s
Value cannot be interpreted as a list of numbers. Verify connection: %s
Verify setting '%s': %s
Veth WEP 128-bit Passphrase WEP 40/128-bit Key (Hex or ASCII) WEP index WEP key index1 (Default) WEP key index2 WEP key index3 WEP key index4 WEP key index set to '%d' WEP key is guessed to be of '%s' WI-FI WPA & WPA2 Enterprise WPA & WPA2 Personal WPA Ad-Hoc authentication requires 'ccmp' pairwise cipher WPA Ad-Hoc authentication requires 'rsn' protocol WPA Ad-Hoc requires 'ccmp' group cipher WPA authentication is incompatible with Shared Key authentication WPA authentication is incompatible with non-EAP (original) LEAP or Dynamic WEP WPA-EAP authentication requires an 802.1x setting WPA-EAP requires 'open' authentication WPA-PSK authentication is incompatible with 802.1x WPA-PSK requires 'open' authentication WPA3 Personal WPAN connection WPAN settings WPS is required WWAN radio switch Wait for NetworkManager startup instead of a connection Waits for NetworkManager to finish activating startup network connections. Wake-on-LAN mode 'default' and 'ignore' are exclusive flags Wake-on-LAN password can only be used with magic packet mode Wake-on-WLAN mode 'default' and 'ignore' are exclusive flags Wake-on-WLAN trying to set unknown flag Warning: %s
Warning: %s is not an UUID of any existing connection profile
Warning: %s.%s set to '%s', but it might be ignored in infrastructure mode
Warning: '%s' should be SSID for hidden APs; but it looks like a BSSID.
Warning: 'file' already specified, ignoring extra one.
Warning: 'type' already specified, ignoring extra one.
Warning: There is another connection with the name '%1$s'. Reference the connection by its uuid '%2$s'
Warning: There are %3$u other connections with the name '%1$s'. Reference the connection by its uuid '%2$s'
Warning: argument '%s' is duplicated.
Warning: editing existing connection '%s'; 'con-name' argument is ignored
Warning: editing existing connection '%s'; 'type' argument is ignored
Warning: master='%s' doesn't refer to any existing profile.
Warning: password for '%s' not given in 'passwd-file' and nmcli cannot ask without '--ask' option.
Warning: polkit agent initialization failed: %s
Warning: setting %s.%s requires removing ipv4 and ipv6 settings
When "method" is set to "auto" and this property to TRUE, automatically configured routes are ignored and only routes specified in the "routes" property, if any, are used. When TRUE, enforce auto-negotiation of speed and duplex mode. If "speed" and "duplex" properties are both specified, only that single mode will be advertised and accepted during the link auto-negotiation process: this works only for BASE-T 802.3 specifications and is useful for enforcing gigabits modes, as in these cases link negotiation is mandatory. When FALSE, "speed" and "duplex" properties should be both set or link configuration will be skipped. When TRUE, only connections to the home network will be allowed. Connections to roaming networks will not be made. When TRUE, overrides the "ca-path" and "phase2-ca-path" properties using the system CA directory specified at configure time with the --system-ca-path switch. The certificates in this directory are added to the verification chain in addition to any certificates specified by the "ca-cert" and "phase2-ca-cert" properties. If the path provided with --system-ca-path is rather a file name (bundle of trusted CA certificates), it overrides "ca-cert" and "phase2-ca-cert" properties instead (sets ca_cert/ca_cert2 options for wpa_supplicant). When TRUE, the settings such as APN, username, or password will default to values that match the network the modem will register to in the Mobile Broadband Provider database. When WEP is used (ie, key-mgmt = "none" or "ieee8021x") indicate the 802.11 authentication algorithm required by the AP here. One of "open" for Open System, "shared" for Shared Key, or "leap" for Cisco LEAP. When using Cisco LEAP (ie, key-mgmt = "ieee8021x" and auth-alg = "leap") the "leap-username" and "leap-password" properties must be specified. When a value greater than 0 is set, configures the device to use the specified speed. If "auto-negotiate" is "yes" the specified speed will be the only one advertised during link negotiation: this works only for BASE-T 802.3 specifications and is useful for enforcing gigabit speeds, as in this case link negotiation is mandatory. If the value is unset (0, the default), the link configuration will be either skipped (if "auto-negotiate" is "no", the default) or will be auto-negotiated (if "auto-negotiate" is "yes") and the local device will advertise all the supported speeds. In Mbit/s, ie 100 == 100Mbit/s. Must be set together with the "duplex" property when non-zero. Before specifying a speed value be sure your device supports it. When a value is set, either "half" or "full", configures the device to use the specified duplex mode. If "auto-negotiate" is "yes" the specified duplex mode will be the only one advertised during link negotiation: this works only for BASE-T 802.3 specifications and is useful for enforcing gigabits modes, as in these cases link negotiation is mandatory. If the value is unset (the default), the link configuration will be either skipped (if "auto-negotiate" is "no", the default) or will be auto-negotiated (if "auto-negotiate" is "yes") and the local device will advertise all the supported duplex modes. Must be set together with the "speed" property if specified. Before specifying a duplex mode be sure your device supports it. When static WEP is used (ie, key-mgmt = "none") and a non-default WEP key index is used by the AP, put that WEP key index here. Valid values are 0 (default key) through 3. Note that some consumer access points (like the Linksys WRT54G) number the keys 1 - 4. Whether LLDP is enabled for the connection. Whether or not slaves of this connection should be automatically brought up when NetworkManager activates this connection. This only has a real effect for master connections. The properties "autoconnect", "autoconnect-priority" and "autoconnect-retries" are unrelated to this setting. The permitted values are: 0: leave slave connections untouched, 1: activate all the slave connections with this connection, -1: default. If -1 (default) is set, global connection.autoconnect-slaves is read to determine the real value. If it is default as well, this fallbacks to 0. Whether the 802.1X authentication is optional. If TRUE, the activation will continue even after a timeout or an authentication failure. Setting the property to TRUE is currently allowed only for Ethernet connections. If set to FALSE, the activation can continue only after a successful authentication. Whether the connection is metered. When updating this property on a currently activated connection, the change takes effect immediately. Whether the interface should be a MACVTAP. Whether the interface should be put in promiscuous mode. Whether the proxy configuration is for browser only. Whether the transmitted traffic must be encrypted. Whether to automatically add routes for the AllowedIPs ranges of the peers. If TRUE (the default), NetworkManager will automatically add routes in the routing tables according to ipv4.route-table and ipv6.route-table. Usually you want this automatism enabled. If FALSE, no such routes are added automatically. In this case, the user may want to configure static routes in ipv4.routes and ipv6.routes, respectively. Note that if the peer's AllowedIPs is "0.0.0.0/0" or "::/0" and the profile's ipv4.never-default or ipv6.never-default setting is enabled, the peer route for this peer won't be added automatically. Whether to autoprobe virtual functions by a compatible driver. If set to NM_TERNARY_TRUE (1), the kernel will try to bind VFs to a compatible driver and if this succeeds a new network interface will be instantiated for each VF. If set to NM_TERNARY_FALSE (0), VFs will not be claimed and no network interfaces will be created for them. When set to NM_TERNARY_DEFAULT (-1), the global default is used; in case the global default is unspecified it is assumed to be NM_TERNARY_TRUE (1). Whether to enable Path MTU Discovery on this tunnel. Wi-Fi Wi-FiAutomatic Wi-FiClient Wi-Fi P2P Wi-Fi P2P connection Wi-Fi connection Wi-Fi connection %d Wi-Fi network mode; one of "infrastructure", "mesh", "adhoc" or "ap". If blank, infrastructure is assumed. Wi-Fi radio switch Wi-Fi scan list Wi-Fi securityNone Wi-Fi security settings WiMAX WiMAX NSP name WiMAX connection WireGuard WireGuard VPN secret WireGuard VPN settings WireGuard private-key Wired Wired 802.1X authentication Wired Ethernet Wired connection Wired connection %d Wireless channel to use for the Wi-Fi connection. The device will only join (or create for Ad-Hoc networks) a Wi-Fi network on the specified channel. Because channel numbers overlap between bands, this property also requires the "band" property to be set. With "cloned-mac-address" setting "random" or "stable", by default all bits of the MAC address are scrambled and a locally-administered, unicast MAC address is created. This property allows to specify that certain bits are fixed. Note that the least significant bit of the first MAC address will always be unset to create a unicast MAC address. If the property is NULL, it is eligible to be overwritten by a default connection setting. If the value is still NULL or an empty string, the default is to create a locally-administered, unicast MAC address. If the value contains one MAC address, this address is used as mask. The set bits of the mask are to be filled with the current MAC address of the device, while the unset bits are subject to randomization. Setting "FE:FF:FF:00:00:00" means to preserve the OUI of the current MAC address and only randomize the lower 3 bytes using the "random" or "stable" algorithm. If the value contains one additional MAC address after the mask, this address is used instead of the current MAC address to fill the bits that shall not be randomized. For example, a value of "FE:FF:FF:00:00:00 68:F7:28:00:00:00" will set the OUI of the MAC address to 68:F7:28, while the lower bits are randomized. A value of "02:00:00:00:00:00 00:00:00:00:00:00" will create a fully scrambled globally-administered, burned-in MAC address. If the value contains more than one additional MAC addresses, one of them is chosen randomly. For example, "02:00:00:00:00:00 00:00:00:00:00:00 02:00:00:00:00:00" will create a fully scrambled MAC address, randomly locally or globally administered. Writing to %s failed: %s
XOR You can specify this option more than once. Press when you're done.
You may edit the following properties: %s
You may edit the following settings: %s
You may try running 'verify fix' to fix errors.
[ Type: %s | Name: %s | UUID: %s | Dirty: %s | Temp: %s ]
['%s' setting values]
[NM property description] [nmcli specific description] a connection using '%s' authentication cannot specify WPA ciphers a connection using '%s' authentication cannot specify WPA protocols a connection using '%s' authentication cannot specify a WPA password a connection using '%s' authentication cannot use WPA key management a fixed TTL is allowed only when path MTU discovery is enabled a gateway is incompatible with '%s' access denied action name missing. activate [] [/|] :: activate the connection
Activates the connection.
Available options:
- device the connection will be activated on
/| - AP (Wi-Fi) or NSP (WiMAX) (prepend with / when is not specified)
activated activating add [] :: append new value to the property
This command adds provided to this property, if the property is of a container type. For single-valued properties the property value is replaced (same as 'set').
advertise, agent-owned, asleep attribute '%s' is invalid for "%s" attribute is not valid for a IPv4 route attribute is not valid for a IPv6 route auth auto autoconnect back :: go to upper menu level
bandwidth percentages must total 100%% binary data missing bluetooth connection both speed and duplex are required for static link configuration both speed and duplex should have a valid value or both should be unset bytes can be enabled only on Ethernet connections can not set property: %s can't be enabled when manual configuration is present can't be simultaneously disabled and enabled can't set property of type '%s' from value of type '%s' cannot detect address family for rule cannot load VPN plugin "%s" due to missing "%s". Missing client plugin? cannot load VPN plugin in '%s': invalid service name cannot load VPN plugin in '%s': missing plugin name cannot load legacy-only VPN plugin "%s" for "%s" cannot load plugin "%s": %s cannot read pac-script from file '%s' cannot read team config from file '%s' cannot set connection.multi-connect for VPN setting cannot set empty "%s" option cannot set parameters for lacp and activebackup runners together certificate detected as invalid scheme certificate is invalid: %s certificate or key file '%s' does not exist change :: change current value
Displays current value and allows editing it.
changes will have no effect until '%s' includes 1 (enabled) channel must not be between %d and %d coalesce option must be either 0 or 1 conflicting secret flags conflicting value of mac-address-randomization and cloned-mac-address connected connected (externally) connected (local only) connected (site only) connecting connecting (checking IP connectivity) connecting (configuring) connecting (externally) connecting (getting IP configuration) connecting (need authentication) connecting (prepare) connecting (starting secondary connections) connection connection available connection does not match access point connection does not match device connection does not match mesh point connection failed connection id fallback%s %u connection type '%s' is not valid connections available construct property "%s" for object '%s' can't be set after construction data missing deactivated deactivating deactivating (externally) default deprecated semicolon at the end of value %s: '%s' describe :: describe property
Shows property description. You can consult nm-settings(5) manual page to see all NM settings and properties.
describe [.] :: describe property
Shows property description. You can consult nm-settings(5) manual page to see all NM settings and properties.
device '%s' not compatible with connection '%s' device '%s' not compatible with connection '%s': disabled disconnected disconnecting don't know how to get the property value duplicate D-Bus property "%s" duplicate VF index %u duplicate bridge VLAN vid %u duplicate key "%s" duplicate key %s duplicate key '%s' duplicate property duplicate setting name element invalid empty text does not describe a rule enabled enabled, error loading setting value: %s failed stat file %s: %s failed to load VPN plugin "%s": %s failed to load nm_vpn_editor_plugin_factory() from %s (%s) failed to set bond option "%s" failed to set property: %s failure to select field field '%s' has to be alone file '%s' contains non-valid utf-8 file permissions for %s filename has invalid format (%s) filename must be an absolute path (%s) flags are invalid flags invalid flags invalid - disabled full fw missing garbage at the end of value %s: '%s' gateway cannot be set if there are no addresses configured gateway is invalid goto [.] | :: enter setting/property for editing
This command enters into a setting or property for editing it.
Examples: nmcli> goto connection
nmcli connection> goto secondaries
nmcli> goto ipv4.addresses
has from/src but the prefix-length is zero has to match '%s' property for PKCS#12 has to/dst but the prefix-length is zero help/? [] :: help for nmcli commands
help/? [] :: help for the nmcli commands
hw hw disabled iface ignoring invalid %s address: %s ignoring invalid %s route: %s ignoring invalid DNS server IPv%c address '%s' ignoring invalid MAC address ignoring invalid SSID ignoring invalid byte element '%u' (not between 0 and 255 inclusive) ignoring invalid gateway '%s' for %s route ignoring invalid number '%s' ignoring invalid raw password ignoring invalid team configuration: %s ignoring missing number incorrect item '%s' in '--order' option incorrect string '%s' of '--order' option interface name contains an invalid character interface name is longer than 15 characters interface name is missing interface name is reserved interface name is too short interface name must be UTF-8 encoded interface name must be alphanumerical with no forward or backward slashes interface name must not be empty interface name of software infiniband device must be '%s' or unset (instead it is '%s') invalid "from" part invalid "to" part invalid 'name' "%s" invalid D-Bus property "%s" invalid D-Bus property "%s" for "%s" invalid D-Bus type "%s" invalid DUID invalid IP address "%s" for allowed-ip of peer invalid IP address: %s invalid IPv%c address '%s' invalid JSON at position %d (%s) invalid PKCS#11 URI "%s" invalid VF %u: %s invalid action: invalid address family invalid attribute type '%s' invalid attribute: %s invalid auth flags invalid boolean value '%s' for attribute '%s' invalid certificate format invalid destination port range invalid endpoint for peer invalid field '%s%s%s%s%s'; %s%s%s invalid field '%s%s%s'; allowed fields: [%s] invalid field '%s%s%s'; no such field invalid field '%s'; allowed fields: %s and %s, or %s,%s invalid file owner %d for %s invalid from/src invalid gateway address '%s' invalid handle: '%s' invalid iifname invalid int32 value '%s' for attribute '%s' invalid json invalid key "%s" invalid key "%s": %s invalid key '%s.%s' invalid key/cert value invalid key/cert value data:;base64, is not base64 invalid key/cert value data:;base64,file:// invalid key/cert value is not a valid blob invalid key/cert value path "%s" invalid link-watchers: %s invalid oifname invalid option '%s', use a combination of [%s] invalid option '%s', use one of [%s] invalid parity value '%s' invalid passwd-file '%s' at line %zd: %s invalid passwd-file '%s': %s invalid peer public key in section '%s' invalid peer secrets invalid permission "%s" invalid prefix %s invalid prefix length for %s '%s', defaulting to %d invalid prefix length for from/src invalid prefix length for to/dst invalid preshared-key for peer invalid preshared-key-flags for peer invalid priority map '%s' invalid proxy method invalid public-key for peer invalid qdisc: %s invalid route: %s. %s invalid runner-tx-hash invalid secret '%s' at %s:%zu invalid setting name invalid setting name '%s' invalid setting: %s invalid source port range invalid tfilter: %s invalid to/dst invalid uint32 value '%s' for attribute '%s' invalid uint64 value '%s' for attribute '%s' invalid uint8 value '%s' for attribute '%s' invalid value invalid value for "%s" invalid value for "%s": %s invalid value for '%s' at %s:%zu invalid variant type '%s' for "%s" ip4 default ip6 default is empty is not a JSON object is not a valid MAC address is not a valid VLAN filtering protocol is not a valid link local MAC address is not a valid option key '%s.%s' has invalid allowed-ips key '%s.%s' is not a integer in range 0 to 2^32 key '%s.%s' is not a uint32 key '%s.%s' is not a valid 256 bit key in base64 encoding key '%s.%s' is not a valid endpoint key '%s.%s' is not a valid secret flag key '%s.%s' is not boolean key cannot contain ".." key contains invalid characters key is too long key must be 32 bytes base64 encoded key must be UTF8 key requires a '.' for a namespace kind is missing libtool archives are not supported (%s) limited long device name%s %s macvlan connection mandatory option '%s' is missing master maximum number of user data entries reached maximum number of user data entries reached (%u instead of %u) metered value %d is not valid method "%s" is not supported for WireGuard millisecondsms missing "plugin" setting missing 'name' attribute missing argument for "%s" missing colon for ".:" format missing dot for ".:" format missing filename missing filename to load VPN plugin info missing from/src for a non zero prefix-length missing key missing key-value separator '%c' after '%s' missing link watcher missing name for VPN plugin info missing name, try one of [%s] missing prefix length for %s '%s', defaulting to %d missing property for ".:" format missing public-key for peer missing service for VPN plugin info missing setting missing setting for ".:" format missing table missing to/dst for a non zero prefix-length mtu mtu can be at most %u but it is %u multiple addresses are not allowed for '%s=%s' must be either psk (0) or eap (1) must contain 8 comma-separated numbers name neither a valid connection nor device given never new hostname nmcli [ ] :: nmcli configuration
Configures nmcli. The following options are available:
status-line yes | no [default: no]
save-confirmation yes | no [default: yes]
show-secrets yes | no [default: no]
prompt-color | <0-8> [default: 0]
%s
Examples: nmcli> nmcli status-line yes
nmcli> nmcli save-confirmation no
nmcli> nmcli prompt-color 3
nmcli can accepts both direct JSON configuration data and a file name containing the configuration. In the latter case the file is read and the contents is put into this property.
Examples: set team.config { "device": "team0", "runner": {"name": "roundrobin"}, "ports": {"eth1": {}, "eth2": {}} }
set team.config /etc/my-team.conf
nmcli successfully registered as a NetworkManager's secret agent.
nmcli successfully registered as a polkit agent.
nmcli tool, version %s
nmcli-overview%s: %s nmcli-overview%s: %s to %s no no (guessed) no active connection on device '%s' no active connection or device no device found for connection '%s' non promiscuous operation is allowed only in passthru mode non-existing peer '%s' none not a file (%s) not a secret property not a valid ethernet MAC address #%u at position %lld not a valid ethernet MAC address for mask at position %lld not a valid hex-string not a valid private key not required, not saved, not valid utf-8 number for '%s' is out of range object class '%s' has no property named '%s' off on only makes sense with EUI64 address generation mode only one VLAN can be the PVID only valid for psk mode openconnect failed with signal %d openconnect failed with status %d openconnect will be run to authenticate.
It will return to nmtui when completed. operation succeeded but object %s does not exist page must be between %d and %d page must be defined along with a channel parent handle missing parent not specified. password is not supported when certificate is not on a PKCS#11 token path is not absolute (%s) peer #%u has invalid allowed-ips setting peer #%u has invalid endpoint peer #%u has invalid public-key peer #%u has no public-key peer #%u is invalid: %s peer #%u lacks public-key peer '%s' is invalid: %s plugin missing port portal preparing print [all] :: print setting or connection values
Shows current property or the whole connection.
Example: nmcli ipv4> print all
print [property|setting|connection] :: print property (setting, connection) value(s)
Shows property value. Providing an argument you can also display values for the whole setting or connection.
property '%s' of object class '%s' is not writable property cannot be set when dhcp-hostname is also set property invalid property invalid (not enabled) property is empty property is empty or wrong size property is invalid property is missing property is not specified property is not specified and neither is '%s:%s' property must contain only digits property name is not UTF-8 property should be TRUE when method is set to disabled property should be TRUE when method is set to ignore or disabled property type should be set to '%s' property value '%s' is empty or too long (>64) quit :: exit nmcli
This command exits nmcli. When the connection being edited is not saved, the user is asked to confirm the action.
registration failed reject %s remove [.] :: remove setting or reset property value
This command removes an entire setting from the connection, or if a property
is given, resets that property to the default value.
Examples: nmcli> remove wifi-sec
nmcli> remove eth.mtu
request succeeded with %s but object is in an unsuitable state rule #%u is invalid: %s rule is invalid: %s running s390 network device type; one of "qeth", "lcs", or "ctc", representing the different types of virtual network devices available on s390 systems. save [persistent|temporary] :: save the connection
Sends the connection profile to NetworkManager that either will save it
persistently, or will only keep it in memory. 'save' without an argument
means 'save persistent'.
Note that once you save the profile persistently those settings are saved
across reboot or restart. Subsequent changes can also be temporary or
persistent, but any temporary changes will not persist across reboot or
restart. If you want to fully remove the persistent connection, the connection
profile must be deleted.
seconds secret flags must not be "not-required" secret flags property not found secret is not UTF-8 secret is not of correct type secret name cannot be empty secret not found set [. ] :: set property value
This command sets property value.
Example: nmcli> set con.id My connection
set [] :: set new value
This command sets provided to this property
setting contained a secret with an empty name setting has invalid variant type setting is required for non-slave connections setting not allowed in slave connection setting not found setting required for connection of type '%s' setting this property requires non-zero '%s' property slave-type '%s' requires a '%s' setting in the connection some flags are invalid for the select mode: %s source-host '%s' contains invalid characters started starting sum not 100% suppress_prefixlength is only allowed with the to-table action suppress_prefixlength out of range sw sw disabled table cannot be zero target-host '%s' contains invalid characters team config exceeds size limit team config file '%s' contains non-valid utf-8 team config is not valid UTF-8 teamd control failed the key contains non-hexadecimal characters the key is empty the key must be %d characters the mask can't contain bits 0 (STP), 1 (MAC) or 2 (LACP) the metric ('%s') must be before attributes the next hop ('%s') must be first the plugin does not support export capability the plugin does not support import capability the property can't be changed the property cannot be set when '%s' is disabled the script is not valid utf8 the script is too large the script lacks FindProxyForURL function the tag id must be in range 0-4094 but is %u the value '%s' is not a valid UUID the vlan id must be in range 0-4094 but is %u there are duplicate TC filters there are duplicate TC qdiscs there exists a conflicting plugin (%s) that has the same %s.%s value there exists a conflicting plugin with the same name (%s) this property cannot be empty for '%s=%s' this property is not allowed for '%s=%s' this property is not allowed for method none token is not in canonical form too many arguments. Please only specify a private key file and optionally a password tunnel keys can only be specified for GRE tunnels unable to set property '%s' of type '%s' from value of type '%s' unavailable unexpected character '%c' for %s: '%s' (position %td) unexpected character '%c' for address %s: '%s' (position %td) unexpected character '%c' in prefix length for %s: '%s' (position %td) unexpected uuid %s instead of %s unknown unknown VPN plugin "%s" unknown attribute unknown attribute '%s' unknown connection '%s' unknown device '%s'. unknown error initializing plugin %s unknown ethtool option '%s' unknown flags 0x%x unknown link-watcher name "%s" unknown property unknown secret flags unknown setting name unmanaged unrecognized line at %s:%zu unsupported action option: '%s'. unsupported attribute '%s' of type '%s' unsupported ethtool setting unsupported key "%s" unsupported qdisc option: '%s'. unsupported secret flags unsupported tfilter option: '%s'. unterminated escape sequence use 'goto ' first, or 'describe .'
use 'goto ' first, or 'set .'
value "%s" of type '%s' is invalid or out of range for property '%s' of type '%s' value %d is not valid value '%d' is out of range <%d-%d> value cannot be interpreted as integer value for '%s' must be a boolean value for '%s' must be a number value is NULL value is empty value is missing value is not a valid token value is not an integer in range [%lld, %lld] value is not valid UTF8 value is too large value out or range verify [all | fix] :: verify setting or connection validity
Verifies whether the setting or connection is valid and can be saved later.
It indicates invalid values on error. Some errors may be fixed automatically
by 'fix' option.
Examples: nmcli> verify
nmcli> verify fix
nmcli bond> verify
vlan setting should have a ethernet setting as well vlanid is out of range [-1, 4094] willing, wired setting not allowed for mode %s wrong type; should be a list of strings. yes yes (guessed) Project-Id-Version: NetworkManager
Report-Msgid-Bugs-To: https://gitlab.freedesktop.org/NetworkManager/NetworkManager/issues
PO-Revision-Date: 2019-08-15 10:06+0000
Last-Translator: ljanda
Language-Team: French
Language: fr
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Plural-Forms: nplurals=2; plural=n>1;
X-Generator: Zanata 4.6.2
# Créé par NetworkManager
# Fusionné depuis %s
%d (clé) %d (phrase de passe) %d (inconnu) %d est supérieure à la valeur du port local max %d %d. L'adresse de serveur DNS n'est pas valide %d. L'adresse IP a une propriété 'label' (étiquette) de type non valide %d. L'adresse IP a une étiquette « %s » non valide %d. L'adresse IP n'est pas valide %d. La route n'est pas valide %lld (%s) %lld - %s %s %s (%s) %s (%s) clonée en tant que %s (%s).
Réseau %s Connexion VPN « %s » le paramètre %s est manquant %s est déjà en cours d'exécution (pid %ld)
%s incompatible avec clés statiques WEP %s n'est pas un type d'itinéraire valable %s uniquement valide pour l'exécuteur %s %s uniquement autorisé pour les exécuteurs %s La valeur « %s » est hors de portée %d %s. Utilisez --help pour afficher une liste d'options valides.
%s: le profil de connexion a changé
%s: profil de connection créé
%s: profil de connexion supprimé
%s: périphérique créé
%s: périphérique supprimé
%s : n'essayez pas de charger le greffon qui a déjà échoué à nouveau %s: utilisation de la connection « %s »
%u MHz %u Mb/s %u Mb/s la règle %u. a une mauvaise address-family la règle %u. est non valide : %s "%%" n'est pas autorisé dans les noms d'interface « %d » n'est pas un canal valide « %d » n'est pas un mode de tunnel valide ’%d’ est hors de la portée valide <128-16384> « %ld » n'est pas un canal valide « %s » et « %s » ne peuvent pas avoir des valeur divergentes « %s » peut uniquement être utilisé avec '%s=%s' (WEP) la connexion « %s » requiert une configuration « %s » ou « %s » la connexion « %s » requiert une configuration « %s » Les connexions '%s' doivent être asservies à '%s', et non à '%s' « %s » contient un(des) caractère(s) non valide(s) (utilisez [A-Za-z._-]) « %s » ne contient pas de script PAC valide « %s » doit être seul « %s » est ambigu (%s) « %s » est ambigu : %s « %s » n'est pas un UUID, ni un nom d'interface « %s » n'est pas un profil de connexion VPN « %s » n'est pas un nom de profil existant « %s » n'est pas un numéro « %s » n'est pas un marqueur DCB valide « %s » n'est pas une adresse Ethernet MAC valide « %s » n'est pas une valeur de port Ethernet valide « %s » n'est pas un FQDN valide « %s » n’est pas un IAID valide « %s » n'est pas une clé IBoIP P_Key valide « %s » n'est pas une adresse Iv%c valide « %s » n'est pas une adresse IPv4 valide « %s » n'est pas une adresse IPv4 valide pour l'option « %s » « %s » n'est pas une adresse IPv6 valide « %s » n'est pas une adresse MAC valide « %s » n'est pas un UUID valide « %s » n'est pas un mode Wi-Fi valide « %s » n'est pas une bande valide « %s » n'est pas un canal valide « %s » n'est pas un canal valide ; utilisez <1-13> « %s » n'est pas une valeur duplex valide « %s » n'est pas un handle valide « %s » n'est pas un caractère hex valide « %s » n'est pas un nom d'interface valide « %s » n’est pas une clé valide '%s' n’est pas un type valide « %s » n'est pas un nombre valide « %s » n'est pas un numéro valide (ou est hors de portée) « %s » n'est pas une clé de tunnel valide « %s » n'est pas une valeur valide pour « %s » « %s » n'est pas une valeur valide pour les connexions de type « %s » « %s » n'est pas une valeur valide pour la propriété %s pas autorisé comme nom d'interface '%s' n'est pas autorisé en bond_mode '%s' n'est pas autorisé en fail_mode '%s' n'est pas autorisé dans le lacp '%s' n'est pas autorisé en mode vlan_mode « %s » n'est pas compatible avec le type « %s » ; veuillez changer ou supprimer la clé « %s » n'est pas valide « %s » n'est pas une clé WEP valide (devrait faire 5 ou 13 caractères ASCI) « %s » n'est pas un WPA PSK valide « %s » n'est pas valide pour l'option « %s » : %s « %s » n'est pas valide : les propriétés doivent être spécifiées sous la forme key=value « %s » n'est pas valide ; 2 ou 3 chaînes doivent être fournies « %s » n'est pas valide ; utilisez « on », « off » ou « ignore » « %s » n'est pas valide ; utiliser = « %s » n'est pas valide ; utilisez [%s] ou [%s] « %s » n'est pas valide ; utilisez [%s], [%s] ou [%s] « %s » est la connexion primaire.
« %s » est en dehors de la plage [% « %s » est en dehors de la plage [0, %u] la longueur de « %s » n'est pas valide (devrait faire 5 ou 6 chiffres) « %s » n'est pas un numéro entre 0 et %u (inclus) « %s » n'est pas un numéro entre 0 et %u (inclus) ou %u « %s » ne fait pas partie de [%s] « %s » n'est pas compatible avec %s « %s » ; veuillez changer la clé et définir le « %s » qui convient pour commencer. l'option « %s » est vide l'option « %s » n’est pas valide en mode « %s » l'option « %s » est uniquement valide pour « %s=%s » l'option « %s » est uniquement valide en mode « %s » L’option %s doit être un multiple de 2 l'option « %s » nécessite que l'option « %s » soit définie l'option « %s » nécessite que l'option « %s » soit définie l'option « %s » doit correspondre à une chaîne « %s » requiert « %s » et la propriété « %s » « %s » requiert de paramétrer la propriété « %s » la sécurité « %s » requiert la présence du paramètre « %s » la sécurité « %s » requiert « %s=%s » « %s » inattendu : parent déjà spécifié. la valeur « %s » ne correspond pas à « %s=%s » « %s » n'est pas un ID de groupe valide « %s » n'est pas un ID d'utilisateur valide « %s::%s » n'est pas un nom de propriété valide ; « %s » n'est pas un sous-type de GObject « %s=%s » est incompatible avec « %s > 0 » « %s=%s » n'est pas une configuration valide pour « %s » les marqueurs « %u » ne sont pas valides ; utilisez une combinaison de %s « %u » n'est pas un mode valide l'argument de « --order » est manquant Le drapeau 'fqdn-clear-flags' est incompatible avec les autres drapeaux FQDN Les indicateurs "fqdn-no-update" et "fqdn-serv-update" ne peuvent pas être activés en même temps (aucune route personnalisée) (Aucune prise en charge de dynamic-wep pour le moment...) (Aucune prise en charge de wpa-enterprise pour le moment...) (par défaut) (aucun) (erreur inconnue) (inconnu) il ne s'agit pas non plus d'un nom de paramètre valide. ---[ Menu principal ]---
goto [ | ] :: aller sur un réglage ou une propriété
remove [.] | :: supprimer la valeur d'un réglage ou d'une propriété
set [. ] :: définir la valeur d'une propriété
describe [.] :: décrire une propriété
print [all | [.]] :: afficher la connexion
verify [all | fix] :: vérifier la connexion
save [persistent|temporary] :: enregistrer la connexion
activate [] [/|] :: activer la connexion
back :: remonter d'un niveau (retour arrière)
help/? [] :: afficher cette aide
nmcli :: configuration de nmcli
quit :: quitter nmcli
---[ Menu des propriétés ]---
set [] :: définir une nouvelle valeur
add [] :: ajouter une nouvelle option à la propriété
change :: modifier la valeur actuelle
remove [ | ] :: supprimer la valeur
describe :: décrire la propriété
print [setting | connection] :: imprimer la(les) valeur(s) de la propriété (paramètre/connexion)
back :: se rendre sur le niveau supérieur
help/? [] :: imprimer cette description d'aide ou de commande
quit :: quitter nmcli
0 (AUCUN) 0 (désactivé) 0 (aucun) Connexion 6LOWPAN Configuration 6LOWPAN 6LoWPAN Configuration 802-1x 802. bande de fréquence du réseau. Soit "a" pour 5GHz 802.11a ou "bg" pour 2.4GHz 802.11. Cela verrouillera les associations au réseau Wi-Fi sur la bande spécifique, c'est-à-dire que si "a" est spécifié, le dispositif ne sera pas associé au même réseau sur la bande 2.4GHz même si les paramètres de réseau sont compatibles. Cette configuration dépendra des capacités spécifiques du pilote et ne fonctionnera pas nécessairement avec tous les pilotes. Échec de la configuration du supplicant 802.1X supplicant 802.1X déconnecté Échec du supplicant 802.1X Le supplicant 802.1X a pris trop longtemps pour s'authentifier La configuration 802.1x requiert une gestion de clé « wpa-eap » 802.3ad | %s ===| éditeur de connexions interactives nmcli |=== A (5 GHz) Une chaîne MCC/MNC telle que "310260" ou "21601" identifiant l'opérateur de réseau mobile spécifique auquel cette connexion s'applique.Si donnée, la connexion s'appliquera à tout dispositif également autorisé par "device-id" et "sim-id" qui contient une carte SIM fournie par cet opérateur. Une connexion peut avoir à la fois '%s' et '%s' en même temps Une connexion de type '%s' ne peut pas avoir une interface ovs-interface.type "%s" Une connexion de type '%s' ne peut pas avoir une interface ovs-interface.type "system" Une connexion de type '%s' doit avoir connection.type "ovs-interface" mais est "%s" Une connexion de type '%s' doit être de type d’interface '%s' et non '%s' Une connexion avec une configuration '%s' doit avoir un master. Une connexion qui aurait pour configuration « %s » doit avoir le type d'esclave (slave-type) défini sur « %s » au lieu de « %s » Une connexion avec une configuration '%s' doit avoir un master. Une connexion avec un paramètre '%s' nécessite connection.type explicitement défini Une connexion avec ovs-interface.type '%s' configurant 'ovs-patch' Une dépendance de la connexion a échoué Un dictionnaire de paires clé/valeur avec les données de l'utilisateur. Ces données sont ignorées par NetworkManager et peuvent être utilisées à la discrétion de l'utilisateur. Les clés ne supportent qu'un format ascii strict, mais les valeurs peuvent être des chaînes UTF8 arbitraires jusqu'à une certaine longueur. Une adresse IP en double a été détectée Un identifiant unique lisible par l'homme pour la connexion, comme "Work Wi-Fi" ou "T-Mobile 3G". Une liste des BSSIDs (chaque BSSIDs étant formaté comme une adresse MAC "00:11:11:22:33:44:55") qui ont été détectés comme faisant partie du réseau Wi-Fi. NetworkManager suit en interne les BSSIDs vus précédemment. La propriété est uniquement destinée à être lue et reflète la liste BSSID de NetworkManager. Les changements que vous faites à cette propriété ne seront pas conservés. Une liste de noms de drivers à faire correspondre. Chaque élément est un motifs à caractères spéciaux shell. Voir NMSettingMatch:interface-name pour savoir comment les caractères spéciaux "|", "&", " !" et "\" sont utilisés pour les correspondances obligatoires et facultatives et pour inverser le modèle. Une liste d'algorithmes de cryptage de groupe/diffusion qui empêche les connexions aux réseaux Wi-Fi n'utilisant pas l'un des algorithmes de la liste. Pour une compatibilité maximale, laissez cette propriété vide. Chaque élément de la liste peut être "wep40", "wep104", "tkip", ou "ccmp". Une liste de noms d'interfaces à faire correspondre. Chaque élément est un motif à caractères spéciaux shell. Un élément peut être préfixé par un symbole de tuyau (|) ou une esperluette (&). Le premier signifie que l'élément est facultatif et le second qu'il est obligatoire. S'il y a des éléments optionnels, la correspondance est considérée comme vraie si au moins un des éléments optionnels correspond (OU logique). S'il y a des éléments obligatoires, alors ils doivent tous correspondre (ET logique). Par défaut, un élément est facultatif. Cela signifie qu'un élément "foo" se comporte de la même manière que "|foo". Un élément peut également être inversé avec un point d'exclamation ( !) entre le symbole de la pipe (ou l'esperluette) et avant le motif. Notez que "!foo" est un raccourci pour la correspondance obligatoire "&!foo". Enfin, une barre oblique inverse peut être utilisée au début de l'élément (après les caractères spéciaux facultatifs) pour échapper au début du motif. Par exemple, "&!a" est une correspondance obligatoire pour littéralement "a". Une liste d'algorithmes de chiffrement par paires qui empêche les connexions aux réseaux Wi-Fi n'utilisant pas l'un des algorithmes de la liste, pour une compatibilité maximale, laissez cette propriété vide. Chaque élément de la liste peut être un des "tkip" ou "ccmp". Une liste de chemins à faire correspondre à la propriété ID_PATH udev des appareils. ID_PATH représente le chemin topologique persistant d'un dispositif. Il contient généralement une chaîne de sous-système (pci, usb, plate-forme, etc.) et un identifiant spécifique au sous-système. Pour les périphériques PCI, le chemin a la forme « pci-$domain:$bus:$device.$function» où chaque variable est une valeur hexadécimale ; par exemple "pci-0000:0a:00.0". Le chemin d'un périphérique peut être obtenu avec "udevadm info /sys/class/net/ | grep$dev ID_PATH=" ou en regardant la propriété "path" exportée par NetworkManager ("nmcli -f general.path device show $dev "). Chaque élément de la liste est un motif à caractères spéciaux shell. Voir NMSettingMatch:interface-name pour savoir comment les caractères spéciaux "|", "&", " !" et "\" sont utilisés pour les correspondances facultatives et obligatoires et pour inverser le modèle. Une liste des adresses MAC permanentes des périphériques Wi-Fi auxquels cette connexion ne doit jamais s'appliquer. Chaque adresse MAC doit être donnée en notation standard hexadécimale (ex : "00:11:22:33:44:55"). Un masque d'adresses de groupe à transférer. Habituellement, les adresses de groupe comprises entre 01:80:C2:00:00:00:00:00 et 01:80:C2:00:00:0F ne sont pas transmises conformément aux normes. Cette propriété est un masque de 16 bits, chacun correspondant à une adresse de groupe dans cette plage qui doit être transmise. Le masque ne peut pas avoir les bits 0, 1 ou 2 car ils sont utilisés pour STP, les frames de pause MAC et LACP. Un mot de passe est requis pour se connecter à « %s ». Problème avec Ethernet RFC 2684 sur pont ADSL Une connexion secondaire à la connexion de base a échoué Une connexion esclave avec « %s » définie à « %s » ne peut pas avoir un paramètre « %s » Chaîne contenant l'identificateur unique DHCPv6 (DUID) utilisé par le client dhcp pour s'identifier aux serveurs DHCPv6 (RFC 3315). Le DUID est porté dans l'option Client Identifier. Si la propriété est une chaîne hexadécimale ('aa:bbb:cc'), elle est interprétée comme un DUID binaire et remplie comme une valeur opaque dans l'option Client Identifier. La valeur spéciale "lease" permet de récupérer le DUID précédemment utilisé dans le fichier de location appartenant à la connexion. Si aucun DUID n'est trouvé et que "dhclient" est le client dhcp configuré, le DUID est recherché dans le fichier de location dhclient du système. Si aucun DUID n'est trouvé, ou si un autre client dhcp est utilisé, un DUID-UUID global et permanent (RFC 6355) sera généré à partir du machine-id. Les valeurs spéciales "llt" et "ll" génèrent un DUID de type LLT ou LL (voir RFC 3315) basé sur l'adresse MAC actuelle de l'appareil. Afin d'essayer de fournir un DUID-LLT stable, le champ d'heure contiendra un horodatage constant qui sera utilisé globalement (pour tous les profils) et persisté sur le disque. Les valeurs spéciales "stable-llt", "stable-llt" et "stable-uuid" génèrent un DUID du type correspondant, dérivé de l'identifiant stable de la connexion et d'une clé unique par hôte. Ainsi, l'adresse de la couche de liens de "stable-ll" et "stable-llt" sera une adresse générée dérivée de l'identifiant stable. La valeur de temps DUID-LLT de l'option "stable-llt" sera choisie dans un intervalle de temps statique de trois ans (la limite supérieure de l'intervalle est la même horodatage constant utilisé dans "llt"). Lorsque la propriété n'est pas définie, la valeur globale fournie pour "ipv6.dhcp-duid" est utilisée. Si aucune valeur globale n'est fournie, la valeur par défaut de la "location" est présumée. Un délai d'attente pour une transaction DHCP en secondes. S'il est égal à zéro (par défaut), une valeur par défaut configurée globalement est utilisée. S'il n'est pas encore spécifié, un délai d'attente spécifique à l'appareil est utilisé (généralement 45 secondes). Réglé sur 2147483647 (MAXINT32) pour l'infini. Un délai d'attente pour l'authentification : zéro signifie la valeur par défaut globale ; si la valeur par défaut globale n'est pas définie, le délai d'attente pour l'authentification est de 25 secondes. Un délai d'attente pour les Alertes de Routeurs en secondes. Si la valeur est nulle (par défaut), une valeur par défaut configurée globalement est utilisée. S'il n'est pas encore spécifié, le délai d'attente dépend des paramètres sysctl de l'appareil. Réglé sur 2147483647 (MAXINT32) pour l'infini. Un identifiant universellement unique pour la connexion, par exemple généré avec libuuuid, qui doit être attribué lors de la création de la connexion et ne doit jamais être modifié tant que la connexion s'applique toujours au même réseau. Par exemple, il ne doit pas être modifié lorsque la propriété "id" ou NMSettingIP4Config change, mais doit être recréé lorsque le SSID Wi-Fi, le fournisseur de réseau mobile à large bande ou la propriété "type" change. l'UUID doit être au format "2815492f-7e56-435e-bbd2e9-2467cdc667 (c-a-d ne doit contenir que des caractères hexadécimaux et "-"). ADSL Connexion ADSL Protocole de connexion ADSL. Peut correspondre à "pppoa", "pppoe" ou "ipoatm". APN ARP Cibles ARP Point d'accès Le point d'accès ne prend pas 802.1x en charge mais la configuration l'exige Le point d'accès ne supporte pas PSK mais la configuration l'exige Le point d'accès est encrypté mais la configuration spécifie la sécurité Activer Activer une connexion Échec de l'activation %s Active Backup Informations d'activation de connexion Ad-Hoc Réseau Ad-Hoc Le mode Ad-Hoc n'est pas compatible avec la sécurité 802.1x Le mode Ad-Hoc n'est pas compatible avec la sécurité LEAP Le mode ad-hoc nécessite une gestion de clé 'none' ou 'wpa-psk' Le mode Ad-Hoc requiert une authentification « open » Adaptive Load Balancing (alb) Adaptive Transmit Load Balancing (tlb) Ajouter Ajouter... Ajout d'une nouvelle connexion « %s » Adresses Durée de vieillissement Autoriser la décompression de données BSD Autoriser la déflation de compression de données Autoriser le contrôle des connexions réseau Autoriser le contrôle des connexions réseau Méthodes d'authentification autorisées : Valeurs autorisées pour la propriété « %s » : %s
Un tableau de 8 valeurs booléennes, où l'index du tableau correspond à la priorité utilisateur (0 - 7) et la valeur indique si la priorité correspondante doit ou non transmettre une pause de priorité. Un tableau de 8 valeurs booléennes, où l'index du tableau correspond à la priorité utilisateur (0 - 7) et la valeur indique si la priorité peut ou non utiliser toute la bande passante allouée à son groupe attribué. Un tableau de 8 valeurs d'uint, où l'index du tableau correspond à l'ID de groupe prioritaire (0 - 7) et la valeur indique le pourcentage de la largeur de bande de liaison allouée à ce groupe. Les valeurs autorisées sont 0 - 100, et la somme de toutes les valeurs doit totaliser 100 pourcent. Un tableau de 8 valeurs d'uint, où l'index du tableau correspond à la priorité utilisateur (0 - 7) et la valeur indique l'ID de groupe prioritaire. Les valeurs autorisées d'ID de groupe prioritaire sont 0 - 7 ou 15 pour le groupe sans restriction. Un tableau de 8 valeurs d'uint, où l'index du tableau correspond à la priorité utilisateur (0 - 7) et la valeur indique le pourcentage de bande passante du groupe assigné à la priorité que la priorité peut utiliser. la somme de tous les pourcentages pour les priorités qui appartiennent au même groupe doit totaliser 100 pourcents. Un tableau de 8 valeurs d'uint, où l'index du tableau correspond à la priorité utilisateur (0 - 7) et la valeur indique la classe de trafic (0 - 7) à laquelle la priorité est affectée. Un tableau de chaînes de caractères définissant l'accès d'un utilisateur donné à cette connexion. Si elle est NULL ou vide, tous les utilisateurs sont autorisés à accéder à cette connexion ; sinon, les utilisateurs sont autorisés si et seulement s'ils sont dans cette liste. Lorsque cette option n'est pas vide, la connexion ne peut être active que si l'un des utilisateurs spécifiés est connecté à une session active. Chaque entrée est de la forme "[type] :[id] :[réservé]" ; par exemple, "user:dcbw:blah". Pour l'instant, seul l' "utilisateur"[type] est autorisé. Toutes les autres valeurs sont ignorées et réservées pour une utilisation future. [id] est le nom d'utilisateur auquel se réfère cette permission, qui ne peut pas contenir le caractère " : ". Toute information[réservée] présente doit être ignorée et est réservée pour une utilisation future. Tous les[type],[id] et[réservé] doivent être valides UTF-8. Adresse http(s) pour vérifier la connectivité internet Chaîne d'identité anonyme pour les méthodes d'authentification EAP Utilisée comme identité non chiffrée avec les types EAP qui supportent différentes identités par tunel comme EAP-TTLS. Êtes-vous sûr de vouloir supprimer la connexion « %s » ? Tableau d'adresses IP des serveurs DNS. Tale de routes IP. Tableau d'objets VLAN en pontage. En plus des VLAN spécifiés ici, le port aura aussi le VLAN pvid fourni par défaut configuré par la propriété bridge.vlan-default-pvid. Dans nmcli, la liste des VLAN peut être spécifiée avec la syntaxe suivante : $vid[pvid][untagged][untagged] [, $vid[pvid][untagged]]].... où $vid est soit un identifiant unique entre 1 et 4094, soit une plage, représentée par un couple d'identifiants séparés par un trait. Tableau d'objets VLAN en pontage. En plus des VLAN spécifiés ici, le port aura aussi le VLAN pvid fourni par défaut configuré par la propriété bridge.vlan-default-pvid. Dans nmcli, la liste des VLAN peut être spécifiée avec la syntaxe suivante : $vid[pvid][untagged][untagged] [, $vid[pvid][untagged]]].... où $vid est soit un identifiant unique entre 1 et 4094, soit une plage, représentée par un couple d'identifiants séparés par un trait. Demander ce mot de passe à chaque fois Authentification L'authentification est requise par le réseau sans fil Erreur du service autoIP Le service autoIP a échoué Le service autoIP n'a pas réussi à démarrer Automatique Automatique (DHCP uniquement) Connecter automatiquement Propriétés disponibles : %s
Paramètres disponibles : %s
Disponible à tous les utilisateurs B/G (2.4 GHz) LIEN BRIDGE BRIDGE PORT BSSID Retour Option « %s » erronée : Type de base de la connexion. Pour les connexions dépendantes du matériel, doit contenir le nom du paramètre spécifique au type de matériel (par exemple, "802-3-ethernet" ou "802-11-wireless" ou "bluetooth", etc), et pour les connexions non dépendantes du matériel comme VPN ou autre, doit contenir le nom du paramètre de ce type (par exemple, "vpn" ou "pont", etc). Bluetooth Adresse du périphérique Bluetooth Liaison Connexion de liaison Connexion de liaison %d Périphérique de liaison Mode de liaison : "active-backup", "balance-slb" ou "balance-tcp". Mode de surveillance de liaison Pont Les VLAN %d et %d ne sont pas ordonnancés par vid ascendant Connexion de pont Connexion de pont %d Périphérique de pontage Pont port Broadcast Largeur de l'octet de la communication série, par exemple le 8 en "8n1". certificat CA doit être sous le format X.509 Connexion CDMA Connexion haut débit mobile CHAP Impossible de changer le type de connexion Annuler Impossible de créer « %s » : %s Ne peut pas définir « %s » sans « %s » Porteuse ou lien modifié(e) Le fichier de certificat est vide Mot de passe du certificat Canal Canal () Canal sur lequel se trouve le réseau mesh auquel se joindre. MAC dupliqué [aucun] Adresse MAC clonée Échec de la fermeture de %s : %s
Emplacement du répertoire de configuration Emplacement du fichier de configuration Configurez les extensions de confidentialité IPv6 pour SLAAC, décrites dans la RFC4941. Si cette option est activée, le noyau génère une adresse IPv6 temporaire en plus de l'adresse publique générée à partir de l'adresse MAC via EUI-64 modifiée. Cela améliore la protection de la vie privée, mais pourrait causer des problèmes dans certaines applications. Les valeurs autorisées sont : 1 : inconnu, 0 : désactivé, 1 : activé (préfère l'adresse publique), 2 : activé (préfère les adresses temporaires). Avoir un paramètre par connexion réglé sur "-1" (inconnu) signifie un retour à la configuration globale "ipv6.ip6.ip6-privacy". Si la configuration globale n'est pas spécifiée ou est définie sur "-1", lire "/proc/sys/net/ipv6/conf/default/use_tempaddr" à la place. Notez que ce paramètre est distinct des adresses Stable Privacy qui peuvent être activées avec le paramètre "stable-privacy" de la propriété "addr-gen-mode" comme un autre moyen d'éviter le suivi des hôtes avec des adresses IPv6. Configurez le jeton pour les identificateurs d'interface à jeton IPv6 IPv6 de draft-chown-6man-tokenised-ipv6-identifiers-02. Utile dans le mode eui64 addr-gen. Connecté Connexion Connexion... Connexion « %s » (%s) ajoutée avec succès.
Connexion « %s » (%s) supprimée.
Connexion « %s » (%s) modifiée.
Connexion « %s » (%s) enregistrée.
Connexion « %s » (%s) mise à jour.
La désactivation de la connexion « %s » a échoué : %s
Connexion « %s » désactivée (chemin D-Bus actif : %s)
Connexion (nom, UUID, ou chemin) : La connexion est déjà active Informations de profil de connexion Partage de connexion via un réseau Wi-Fi protégé Partage de connexion via un réseau Wi-Fi ouvert Connexion activée (%s) (Chemin D-Bus actif : %s)
Connexion activée (chemin D-Bus actif : %s)
Connexion au périphérique réactivée : %s)
Connexion(s) (nom, UUID, ou chemin) : Connexion(s) (nom, UUID, path ou apath) : Connectivité La connectivité est « %s » maintenant
Contrainte pour le nom de domaine du serveur. Si défini, ce FQDN est utilisé comme exigence de correspondance de suffixe pour le ou les éléments dNSName du certificat présenté par le serveur d'authentification pendant l'authentification interne "phase 2". Si un dNSName correspondant est trouvé, cette contrainte est remplie. Si aucune valeur dNSName n'est présente, cette contrainte est comparée à CN SubjectName utilisant la même correspondance de suffixe. Depuis la version 1.24, plusieurs FQDNs valides peuvent être passés comme une liste délimitée par « ; ». Contrainte pour le nom de domaine du serveur. Si défini, ce FQDN est utilisé comme correspondance de suffixe pour le ou les éléments dNSName du certificat présenté par le serveur d'authentification. Si un dNSName correspondant est trouvé, cette contrainte est remplie. Si aucune valeur dNSName est présente, cette contrainte est comparée au CN du SubjectName en utilisant cette correspondance de suffixe. Depuis la version 1.24, plusieurs FQDN valides peuvent être passés en tant que liste délimitée par « ; ». Contrainte pour le nom de domaine du serveur. Si définie, ce FQDN est utilisé comme exigence de correspondance de suffixe pour le ou les éléments dNSName du certificat présenté par le serveur d'authentification pendant l'authentification interne "phase 2". Si un dNSName correspondant est trouvé, cette contrainte est remplie. Si aucune valeur dNSName n'est présente, cette contrainte est comparée à CN SubjectName utilisant la même correspondance. Plusieurs FQDNs valides peuvent être passés comme une liste délimitée par « ; ». Contrainte pour le nom de domaine du serveur. Si définie, cette liste de FQDN est utilisée comme correspondance de suffixe pour le ou les éléments dNSName du certificat présenté par le serveur d'authentification. Si un dNSName correspondant est trouvé, cette contrainte est remplie. Si aucune valeur dNSName est présente, cette contrainte est comparée au CN du SubjectName. Plusieurs FQDNs peuvent être passés en tant que liste délimitée par « ; ». Contient le certificat de l'AC "phase 2" s'il est utilisé par la méthode EAP spécifiée dans les propriétés "phase2-auth" ou "phase2-autheap". Les données du certificat sont spécifiées à l'aide d'un "schéma" ; trois sont actuellement prises en charge : blob, path et pkcs#11 URL. Lorsque vous utilisez le schéma blob, cette propriété doit être définie sur les données codées DER du certificat. Lorsque vous utilisez le schéma path, cette propriété doit être définie sur le chemin complet du certificat encodé en UTF-8, préfixé par la chaîne "file://" et se terminant par un octet NUL. Cette propriété peut être désactivée même si la méthode EAP prend en charge les certificats CA, mais cela permet des attaques malveillantes et n'est PAS recommandé. Notez que l'activation de NMSetting8021x:system-ca-certs remplacera ce paramètre pour utiliser le chemin intégré, si le chemin intégré n'est pas un répertoire. Contient le certificat client "phase 2" si utilisé par la méthode EAP spécifiée dans les propriétés "phase2-auth" ou "phase2-autheap" ; les données du certificat sont spécifiées en utilisant un "schéma" ; deux sont actuellement supportées : blob et path ; lorsque vous utilisez le schéma blob (qui est rétrocompatible avec NM 0.7.x) cette propriété doit être définie comme les données codées DER du certificat, et le chemin complet du certificat doit être défini en UTF-8, avec le "file://" et se terminant par un octet NUL de terminaison. Cette propriété peut être désactivée même si la méthode EAP supporte les certificats CA, mais cela permet les attaques malveillantes et n'est PAS recommandé. Contient la clé privée interne "phase 2" lorsque la propriété "phase2-auth" ou "phase2-autheap" est définie sur "tls". Les données clés sont spécifiées à l'aide d'un "schéma" ; deux sont actuellement prises en charge : blob et path. Lors de l'utilisation du schéma blob et des clés privées, cette propriété doit être définie sur les données codées PEM cryptées de la clé. Lors de l'utilisation de clés privées avec le schéma de chemin d'accès, cette propriété doit être définie sur le chemin d'accès encodé UTF-8 complet de la clé, préfixé par la chaîne "file:///" et se terminant par un octet NUL de fin. Lors de l'utilisation des clés privées au format PKCS#12 et du schéma blob, cette propriété doit être définie sur les données PKCS#12 et la propriété "phase2-private-key-password" doit être définie sur le mot de passe utilisé pour décrypter le certificat et la clé PKCS#12. Lors de l'utilisation des fichiers PKCS#12 et du schéma de chemins, cette propriété doit être définie sur le chemin complet encodé en UTF-8 de la clé, préfixé par la chaîne "file://" et se terminant par un octet NUL de fin, et comme pour le schéma blob, la propriété "phase2-private-key-password" doit être définie comme le mot de passe utilisé pour décoder la clé privée PKCS#12 et son certificat. Contient le certificat CA si utilisé par la méthode EAP spécifiée dans la propriété "eap". Les données du certificat sont spécifiées à l'aide d'un "schéma" ; trois sont actuellement prises en charge : blob, path et pkcs#11. Lorsque vous utilisez le schéma blob, cette propriété doit être définie sur les données codées UTF-8 du certificat. Lorsque vous utilisez le schéma path, cette propriété doit être définie comme chemin complet UTF-8, préfixée avec la chaîne "file://" et terminant par un byte NUL. Cette propriété peut être annulée même si la méthode EAP prend en charge les certificats CA, mais cela ouvre la porte aux attaques malveillantes et n’est donc PAS conseillé. Notez qu’activer les NMSetting8021x:system-ca-certs remplacera cette configuration pour utiliser le chemin intégré si le chemin intégré ne correspond pas à un répertoire. Contient le certificat du client s'il est utilisé par la méthode EAP spécifiée dans la propriété "eap". Les données du certificat sont spécifiées à l'aide d'un "schéma" ; deux sont actuellement prises en charge : blob et pat. Si vous utilisez le schéma blob (qui est rétrocompatible avec NM 0.7.x) cette propriété doit être définie sur les données codées DER du certificat. Si vous utilisez le schéma path, cette propriété doit être définie au chemin complet UTF-8, préfixée de "file://" et terminant par un byte NUL final. Contient la clé privée lorsque la propriété "eap" est définie sur "tls". Les données clés sont spécifiées à l'aide d'un "schéma" ; deux sont actuellement prises en charge : blob et path. Lors de l'utilisation du schéma blob et des clés privées, cette propriété doit être définie sur les données codées PEM cryptées de la clé. Lors de l'utilisation de clés privées avec le schéma de chemin d'accès, cette propriété doit être définie sur le chemin d'accès encodé UTF-8 complet de la clé, préfixé par la chaîne "file:///" et se terminant par un octet NUL de fin. Lors de l'utilisation des clés privées au format PKCS#12 et du schéma blob, cette propriété doit être définie sur les données PKCS#12 et la propriété "clé privée-mot de passe" doit être définie sur mot de passe utilisé pour décrypter le certificat et la clé PKCS#12. Lors de l'utilisation des fichiers PKCS#12 et du schéma de chemins, cette propriété doit être définie sur le chemin complet encodé en UTF-8 de la clé, préfixé par la chaîne "file://" et se terminant par un octet NUL de fin, et comme pour le schéma blob, la propriété "private key-password" doit être définie par le mot de passe utilisé pour décoder la clé privée et le certificat PKCS#12. ATTENTION : "clé privée" n'est pas une propriété "secrète", et donc des données de clé privée non cryptées utilisant le schéma BLOB peuvent être lues par des utilisateurs non privilégiés. Les clés privées doivent toujours être cryptées à l'aide d'un mot de passe de clé privée afin d'empêcher tout accès non autorisé aux données non cryptées des clés privées. Contrôle l'activation du filtrage VLAN sur le pontage. Contrôle l'interprétation des clés WEP : les valeurs autorisées sont NM_WEP_KEY_TYPE_KEY_TYPE_KEY (1), auquel cas la clé est soit une chaîne hexadécimale de 10 ou 26 caractères, soit un mot de passe ASCII de 5 ou 13 caractères ; ou NM_WEP_KEY_TYPE_PASSPHRASE (2), auquel cas la phrase de passe est fournie en chaîne et sera tracée selon la méthode MD5 pour obtenir la clé WEP actuelle. Vérifie si IGMP Snooping est activé pour ce pontage, mais si le snooping a été automatiquement désactivé en raison des collisions de hachage, le système peut refuser d'activer la fonction jusqu'à ce que les collisions soient résolues. Contrôle si le protocole Spanning Tree Protocol (STP) est activé pour ce pont. Contrôle si la comptabilité des statistiques par VLAN est activée. Cookie Correspond au teamd mcast_rejoin.count. Correspond au teamd mcast_rejoin.count. Correspond au teamd notify_peers.count. Correspond au teamd notify_peers.count. Correspond au teamd ports.PORTIFNAME.lacp_key. Correspond au teamd ports.PORTIFNAME.lacp_prio. Correspond au teamd ports.PORTIFNAME.lacp_key. Correspond au teamd ports.PORTIFNAME.queue_id. Quand il est défini à -1, cela signifie que le paramètre est ignoré de la configuration json. Correspond au teamd ports.PORTIFNAME.lacp_key. Correspond au teamd runner.active. Correspond au teamd runner.active. Correspond au teamd runner.active. Correspond au teamd runner.active. Correspond au teamd runner.active. Correspond au teamd runner.name. Les valeurs autorisées sont : "roundrobin", "broadcast", "activebackup", "loadbalance", "lacp", "random". Correspond au teamd runner.active. Correspond au teamd runner.active. Correspond au teamd runner.active. Correspond au teamd runner.active. Impossible d'activer la connexion : « %s » Impossible de contacter le NetworkManager : « %s »
Impossible de créer un lien logiciel Impossible de créer un éditeur pour la connexion « %s » de type « %s ». Impossible de créer un éditeur pour la connexion invalide « %s ». Impossible de créer le fichier temporaire : %s Impossible de démoniser : %s [error %u]
Impossible de désactiver la connexion : %s Impossible de décoder la clé privée. Impossible de supprimer la connexion : « %s » : %s N'a pas pu trouver le binaire « %s » Impossible de trouver un identifiant de session pour l'uid %d Impossible de générer des données aléatoires. Impossible de charger le fichier « %s »
Impossible d'analyser les arguments Impossible de relire le fichier : %s Impossible de récupérer l'identifiant de la session : %s Impossible de décoder le fichier PKCS#12 : %d Impossible de décoder le fichier PKCS#12 : %s Impossible de décoder le fichier PKCS#8 : %s Impossible de décoder le certificat : %d Impossible de décoder le certificat : %s Impossible d'initialiser le décodeur PKCS#12 : %d L'initialisation du décodeur PKCS#12 a échoué : %s L'initialisation du décodeur PKCS#8 a échoué : %s L'initialisation du décodeur PKCS#8 a échoué Impossible de vérifier le fichier PKCS#12 : %d Impossible de vérifier le fichier PKCS#12 : %s Créer Configuration nmcli actuelle :
Nom de service D-Bus du plugin VPN que ce paramètre utilise pour se connecter à son réseau. i.e. org.freedesktop.NetworkManager.vpnc pour le plugin vpnc. L'installation DCB ou FCoE a échoué Configuration DCB Adresse MAC anycast DHCP [none] Erreur du client DHCP Échec du client DHCP Échec du démarrage du client DHCP L'option DHCP ne peut pas comporter plus de 255 caractères DHCPv6 ne prend pas en charge l'indicateur FQDN E (encodé) Serveurs DNS DSL Authentification DSL Connexion DSL %d La connexion DUN doit inclure une configuration GSM ou CDMA DUN exigé, sauf que le périphérique Bletooth ne prend pas DUN en charge Datagramme Désactiver Supprimer Destination Détecte une connexion esclave avec « %s » défini et un type de port « %s ». « %s » doit être défini sur « %s » Périphérique Périphérique « %s » introuvable Périphérique « %s » activé avec « %s ».
Périphérique « %s » déconnecté.
Périphérique « %s »supprimé.
Voisins du périphérique LLDP MAC (%s) du périphérique est sur la liste noire de la connexion. Détails de périphérique Le périphérique a été déconnecté par l'utilisateur ou le client Le périphérique est maintenant géré Le périphérique n'est pas géré actuellement Dictionnaire des paires clé/valeur de données spécifiques aux plugins VPN. Les clés et les valeurs doivent être des chaînes de caractères. Dictionnaire des paires clé/valeur des secrets spécifiques des plugins VPN, comme les mots de passe ou les clés privées. Les clés et les valeurs doivent correpondre à des chaînes de caractères. Dictionnaire des combinaisons clé/valeur des options de collage Les clés et les valeurs doivent être des chaînes de caractères et les noms des options ne doivent contenir que des caractères alphanumériques (c.-à-d.,[a-zA-Z0-9]). Désactivé Déconnecté par l'utilisateur Souhaitez-vous aussi supprimer « %s » ? [yes] : Souhaitez-vous aussi définir « %s » sur « %s » ? [yes] : Souhaitez-vous les supprimer ? [oui] Ne pas devenir un démon Ne pas devenir un démon, et se connecter à stderr Ne rien imprimer Factice Connexion factice Paramètres fictifs WEP Dynamique (802.1x) WEP Dynamique requiert une gestion de clés « ieee802x » WEP Dynamique requiert une authentification « open » WEP Dynamique requiert une configuration 802.1x EAP La gestion des clés EAP requiert la présence de paramètres '%s' ETHERNET Paramétrer la valeur « %s » : Modifier la connexion Modifier une connexion Modifier... Modification de la connexion « %s » : « %s » L'éditeur a échoué : %s Carte des priorités sortantes [aucune] Soit "dun" pour les connexions au réseau Dial-Up, soit "panu" pour les connexions au réseau local personnel vers des périphériques prenant en charge le profil NAP. Activer le snoopingIGMP Activer le protocole STP (Spanning Tree Protocol) Activer ou désactiver le RSTP. Activer ou désactiver STP. Activer ou désactiver des périphériques Wi-Fi Activer ou désactiver des périphériques WiMAX à large bande Activer ou désactiver le contrôle de connectivité Activer ou désactiver les statistiques système du périphérique Activer ou désactiver des périphériques mobiles à large bande Activer ou désactiver le snooping multicast. Activer ou désactiver l'envoi de requêtes multicast par la passerelle. Si elle n'est pas spécifiée, l'option est désactivée. Activer ou désactiver le réseau système Active le routage de stratégie (routage source) et définit la table de routage utilisée lors de l'ajout de routes. Ceci affecte toutes les routes, y compris les routes de périphériques, IPv4LL, DHCP, SLAAC, les routes par défaut et les routes statiques. Mais notez que les routes statiques peuvent écraser individuellement le paramètre en spécifiant explicitement une table de routage non nulle. Si le réglage de table est laissé à zéro, il peut être écrasé via la configuration globale. Si la propriété est nulle même après l'application de la valeur de configuration globale, le routage des stratégies est désactivé pour la famille d'adresses de cette connexion. Le routage de stratégie désactivé signifie que NetworkManager ajoutera toutes les routes à la table principale (sauf les routes statiques qui configurent explicitement une table différente). En outre, NetworkManager ne supprimera les routes extrinsèques aux tables, à l'exception de la table principale, ceci afin de préserver la rétrocompatibilité pour les utilisateurs qui gèrent les tables de routage en dehors de NetworkManager. Active ou désactive le mode « hairpin » pour le port, qui permet de renvoyer les trames par le port sur lequel la trame a été reçue. Active ou désactive le provisionnement en ligne des identifiants EAP-FAST lorsque FAST est spécifié comme méthode EAP dans la propriété "eap". Les valeurs reconnues sont "0" (désactivé), "1" (autorise le provisionnement non authentifié), "2" (autorise le provisionnement authentifié) et "3" (autorise le provisionnement authentifié et non authentifié). Voir la documentation wpa_supplicant pour plus de détails. Encapsulation de la connexion ADSL. Peut correspondre à "vcmux" ou "llc". Enhanced Open (OWE) Saisissez la valeur « %s » : Saisissez une liste des adresses IPv4 formatées comme suit :
ip[/prefix], ip[/prefix],...
Le préfixe manquant est considéré comme un préfixe de 32.
Exemple : 192.168.1.5/24, 10.0.0.11/24
Saisissez une liste d'adresses IPv4 de serveurs DNS.
Exemple : 8.8.8.8, 8.8.4.4
Saisissez une liste des routes IPv4 formatée comme suit :
ip/[prefix] next-hop [metric],...
Le préfixe manquant est considéré comme un préfixe de 32.
Le prochain rebond (hop) manquant est considéré comme 0.0.0.0.
La métrique manquante est considérée comme une métrique par défaut (NM/noyau va définir une valeur par défaut).
Examples: 192.168.2.0/24 192.168.2.1 3, 10.1.0.0/16 10.0.0.254
10.1.2.0/24
Saisissez une liste des adresses IPv4 formatées comme suit :
priority [prio] [from [src]] [to [dst]], ,...
Saisissez une liste des adresses IPv6 formatées comme suit :
ip[/prefix], ip[/prefix],...
Le préfixe manquant est considéré comme un préfixe de 128.
Exemple : 2607:f0d0:1002:51::4/64, 1050:0:0:0:5:600:300c:326b
Saisissez une liste des adresses IPv6 de serveurs DNS. Si la méthode de configuration IPv6 est « auto », ces serveurs DNS seront ajoutés à ceux (s'il y en a) qui sont retourné(s) par la configuration automatique. Les serveurs DNS ne peuvent pas être utilisés avec les méthodes de configuration IPv6 « shared » ou « link-local », car il n'y a pas de réseau en amont. Dans toutes les autres méthodes de configuration IPv6, ces serveurs DNS sont utilisés comme les seuls serveurs DNS pour cette connexion.
Exemple : 2607:f0d0:1002:51::4, 2607:f0d0:1002:51::1
Saisissez une liste des routes IPv6 formatées comme suit :
ip[/prefix] [next-hop] [metric],...
Le préfixe manquant est considéré comme un préfixe de 128.
Le prochain rebond (hop) manquant est considéré comme « :: ».
La métrique manquante est considérée comme une métrique par défaut (NM/noyau va définir une valeur par défaut).
Exemple : 2001:db8:beef:2::/64 2001:db8:beef::2, 2001:db8:beef:3::/64 2001:db8:beef::3 2
abbe::/64 55
Saisissez une liste des adresses IPv6 formatées comme suit :
priority [prio] [from [src]] [to [dst]], ,...
Saisissez une liste d’options S/390 formatées ainsi :
option = , option = ,...
Les options acceptées sont : %s
Saisir une liste d'options de liaisons formatées ainsi :
option = , option = ,...
Options valides : %s
'mode' peut être un nom ou un nombre :
balance-rr = 0
active-backup = 1
balance-xor = 2
broadcast = 3
802.3ad = 4
balance-tlb = 5
balance-alb = 6
Exemple : mode=2,miimon=120
Saisir une liste d’observateurs de liens comme dictionnaires dont les clés dont des propriétés teamd. Les paires de dictionnaire sont sous la forme : key=value et les paires sont séparées par ' '. Les dictionnaires sont séparés par ','.
Les clés autorisées / requises dans le dictionnaire changent selon le type d’observateur de lien, tandis que la seule propriété commune à tous les observateurs de lien est le « nom » qui définit l’observateur de lien à spécifier.
Propriétés disponibles pour l’observateur de lien 'ethtool' :
'delay-up', 'delay-down'
Propriétés disponibles pour l’observateur de lien 'nsna_ping' :
'init-wait', 'interval', 'missed-max', 'target-host'*
Propriétés disponibles pour 'arp_ping' incluent toutes celles de 'nsna_ping' et :
'source-host'*, 'validate-active', 'validate-inactive', 'send-always'.
Propriétés marquées par '*' sont obligatoires.
Exemple:
name=arp_ping source-host=172.16.1.1 target-host=172.16.1.254, name=ethtool delay-up=3
Saisissez une liste de sous-canaux (séparés par des virgules ou espaces).
Exemple : 0.0.0e20 0.0.0e21 0.0.0e22
Saisissez une liste des permissions utilisateur. Ceci est une liste des noms d'utilisateur formatée comme suit :
[user:], [user:],...
Les éléments peuvent être séparés par des virgules ou des espaces.
Exemple : alice bob charlie
Saisir une valeur qui indique si la connexion est assujetie à un quota de données
des coûts d'utilisation ou d'autres limitations. Les options acceptées sont :
'true','yes','on' pour définir la connexion comme étant mesurée
'false','no','off' pour définir la connexion comme n'étant pas mesurée
'unknown' permettre au NetworkManager de choisir une valeur à partir d'heuristiques
Saisissez les octets en tant que liste de valeurs hexadécimales.
Deux formats sont acceptés :
(a) une chaîne d'entiers hexadécimaux, dans laquelle deux entiers représentent un octet
(b) une liste séparée par des espaces d'octets écrits en tant qu'entiers hexadécimaux (avec un préfixe optionnel 0x/0X, ainsi qu'un 0 le précédant optionnellement).
Exemples : ab0455a6ea3a74C2
ab 4 55 0xa6 ea 3a 74 C2
Saisissez le type de connexion : Saisir le chemin du fichier de certificat d’autorité (CA) (peut être précédé de file://). [file://]
Notez que nmcli ne supporte pas que l'on spécifie les certificats sous forme de données brutes de blob.
Exemple : /home/cimrman/cacert.crt
Saisir le chemin du fichier de certificat d’autorité (CA) pour une authorisation interne (peut être précédé de file://).>
[file://]
Notez que nmcli ne supporte pas que l'on spécifie les certificats sous forme de données brutes de blob.
Exemple : /home/cimrman/ca-zweite-phase.crt
Saisir le chemin du certificat client (CA) (peut être précédé de file://). [file://]
Notez que nmcli ne supporte pas que l'on spécifie les certificats sous forme de données brutes de blob.
Exemple : /home/cimrman/jara.crt
Saisir le chemin du fichier de certificat client pour une authorisation interne (peut être précédé de file://).>
[file://]
Notez que nmcli ne supporte pas que l'on spécifie les certificats sous forme de données brutes de blob.
Exemple : /home/cimrman/jara-zweite-phase.crt
Saisissez le chemin d'accès vers une clé privée et le mot de passe de la clé (s'il n'a pas déjà été défini) :
[file://] [